中空玻璃打胶机的打胶环节和中空玻璃之间的关系
时间:2021-09-11 来源:http://www.jncsjx.com/ 发布人:昌盛机械
可能很多人会疑问,中空玻璃自动打胶机的打胶环节和中空玻璃有什么关系。接下来,小编就给大家一起来说一下中空玻璃自动打胶机的打胶环节和中空玻璃的关系。
Many people may wonder what is the relationship between the gluing link of the automatic gluing machine for insulating glass and insulating glass. Next, I'll tell you about the relationship between the gluing link of the automatic gluing machine for insulating glass and the insulating glass.
一块合格的中空玻璃不仅在于规范的操作流程与完美的工艺技术,更需要能满足中空玻璃性能的中空玻璃加工设备和与其相关的密封材料。不同的中空玻璃的密封差异可能让中空玻璃呈现的工艺成品以及综合性能不同。
A qualified insulating glass not only depends on the standard operation process and perfect process technology, but also needs the insulating glass processing equipment and its related sealing materials that can meet the performance of insulating glass. The sealing difference of different insulating glass may make the process finished products and comprehensive performance of insulating glass different.
中空玻璃的密封主要采用密封胶,起到中空玻璃的密封作用。中空玻璃的密封,除紫外线照射是测试中空玻璃密封胶是否含有影响视线的有机挥发物外,另外四项指标“密封性能、初始露点、高温高湿、气候循环”,都是检测中空玻璃在各种环境下的密封性能的。中空玻璃的密封主要采用密封胶,起到中空玻璃的密封作用。
Sealant is mainly used for the sealing of insulating glass, which plays the sealing role of insulating glass. For the sealing of insulating glass, in addition to ultraviolet irradiation, which is used to test whether the insulating glass sealant contains organic volatiles that affect the line of sight, the other four indicators "sealing performance, initial dew point, high temperature and humidity, and climate cycle" are all used to test the sealing performance of insulating glass under various environments. Sealant is mainly used for the sealing of insulating glass, which plays the sealing role of insulating glass.
槽铝式双道密封中空玻璃一道密封用丁基胶,具有非常低的水蒸气透过率;二道密封胶主要有聚硫胶和硅酮胶。间隔铝框宜采用连续长管弯角式,接头处应用丁基胶做密封处理;间隔铝框如采用四角插接式,其各个接头处亦应用丁基胶做密封处理,以此做成的中空玻璃,使用寿命不如前者。当中空玻璃二道密封胶采用硅酮胶时,不应采用四角插接式间隔铝框的中空玻璃。
The aluminum channel double seal insulating glass is sealed with butyl rubber, which has a very low water vapor transmission rate; The secondary sealant mainly includes polysulfide adhesive and silicone adhesive. The interval aluminum frame should be of continuous long pipe angle type, and the joints should be sealed with butyl rubber; If the four corner plug-in type is adopted for the spacing aluminum frame, the joints shall also be sealed with butyl rubber. The service life of the insulating glass made by this method is not as long as that of the former. When silicone sealant is used for the second layer of insulating glass, the insulating glass with four corner plug-in spacer aluminum frame shall not be used.
单道密封中空玻璃是难以满足中空玻璃的密封性能的。为弥补这些胶的密封性能的不足,通常采用水汽透过率非常低,但结构性差的聚异丁烯胶作为中空玻璃的一道密封胶,以阻止潮气向中空玻璃内渗透,这就是传统的大家熟悉的双道密封中空玻璃的生产工艺。由于双道密封中空玻璃所采用的二种密封胶各自性能上的缺陷,只能采用两者结合的方式(即双道密封式)才能满足中空玻璃的密封性和结构性指标。现在有一些新型中空玻璃密封胶:结构型热熔丁基密封胶。
It is difficult to meet the sealing performance of insulating glass with single seal. In order to make up for the lack of sealing performance of these adhesives, polyisobutylene adhesive with very low water vapor permeability but poor structure is usually used as a sealant of insulating glass to prevent moisture from penetrating into the insulating glass, which is the traditional production process of double sealed insulating glass. Due to the defects in the performance of the two sealants used in the double sealed insulating glass, only the combination of the two sealants (i.e. double sealed type) can meet the sealing and structural indexes of the insulating glass. There are some new sealant for insulating glass: structural hot melt butyl sealant.
中空玻璃打胶机主要用于中空玻璃的打胶环节,也就是我们平时所说的密封环节。中空玻璃打胶机主要针对中空玻璃的一道密封。使用专用设备将热熔丁基胶加热熔化后,用中空玻璃打胶机将丁基胶涂至中空玻璃的涂胶部位。这个打胶速度要掌握好,因为丁基胶几分钟就冷却定型,打胶速度
The insulating glass gluing machine is mainly used for gluing of insulating glass, which is what we usually call sealing. The insulating glass gluing machine is mainly used for sealing the insulating glass. After the hot-melt butyl rubber is heated and melted by special equipment, the butyl rubber is applied to the gluing part of the insulating glass with the insulating glass gluing machine. The gluing speed should be well controlled, because the butyl glue will be cooled and set in a few minutes, and the gluing speed
以上就是为大家介绍的有关玻璃涂布机设备的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度
The above is the detailed introduction of the glass coater equipment. I hope it will help you. If you have any questions, please contact us.
上一篇:
下一篇:中空玻璃打胶机的使用技巧
相关新闻 moer+
- 中空玻璃全自动封胶线的优缺点是什么 2025/01/07
- 双组份打胶机出花胶怎样处理 2025/01/04
- 中空玻璃全自动封胶线一天能做多少平方 2024/12/28
- 中空玻璃生产线一天能做多少平方 2024/12/23
- 全自动丁基胶涂布机操作规程 2024/12/14
- 丁基胶涂布机在使用的常见问题 2024/12/13
- 双组份打胶机如何调整滴胶量? 2024/12/09
- 中空玻璃生产线的磨损如何解决 2024/12/07
- 双组份打胶机对于打胶工作完成很重要 2024/12/05
- 全自动封胶线的工业自动化设备介绍 2024/12/03