防止污染物料污染到打胶机的局部的措施

时间:2018-04-08 来源:http://www.jncsjx.com/ 发布人:昌盛机械

  小的保养问题我们没有做到位就很容易导致设备出现损坏、零部件出现老化加速的情况。比如胶管正常清洗的话使用三年毫无压力的,但是我们平时没有保持良好的清洗习惯,估计半年左右就需要更换!

  The small maintenance problem is not easy enough to lead to equipment damage and aging. For example, if the hose is normally cleaned, it has been used for three years without pressure. But we usually do not keep good cleaning habits. It is estimated that about half a year will need to be replaced.

  我们需要对中空玻璃双组份打胶机的供胶部分进行定期的清理,比如胶管、混胶器、胶头等。因为我们加工生产中空玻璃所使用的胶体的特殊性极易有部分胶体残留在这些零部件内容易造成如出胶不均等故障的出现。

  We need to regularly clean up the supply parts of the two component rubber gluing machine, such as rubber hose, glue mixer, rubber head and so on. Because of the particularity of the colloid used to process the production of hollow glass, some of the colloids are easily retained in these parts.

  操作人员好每天都要对打胶机设备的外表上做一番清理。一般要注意要让残留的硅胶和杂物灰尘彻底清理干净,并且要保持工作室内的清理,防止打胶机受到外在环境的干扰。

双组份打胶机

  The operator should clean up the appearance of the glue machine everyday. In general, we should pay attention to cleaning the residual silica gel and debris dust thoroughly, and keep the cleaning in the studio so as to prevent the glue machine from being disturbed by the external environment.

  为了防止打胶机的轴杆以及密封圈老化或者受损,操作人员好定期使用硅油对其进行清洗。清洗完毕后好能保持其干燥,并保证放置在比较封闭的地方。

  In order to prevent aging and damage of the shaft and seal ring of the glue machine, operators should regularly use silicone oil to clean it. After washing, it is best to keep it dry and keep it in a closed place.

  在保证了打胶机的外表干净整齐的前提下,要注意防止打胶机的操作中的污染物料污染到打胶机的局部,尤其不能干扰到打胶机的重要零部件,比如枪头部分等等。

  On the premise of ensuring the clean and neat appearance of the glue machine, we should pay attention to preventing the contamination of the contaminated material from the operation of the glue machine to the part of the glue machine, especially the important parts of the glue machine, such as the gun head part and so on.

  本文由双组份打胶机友情奉献.更多有关的知识请点击:http://www.jncsjx.com我们将用的技术.真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This article is dedicated to the double component glue machine. More related knowledge, please click: http://www.jncsjx.com we will use the most advanced technology. The most sincere attitude. Provide you with the most comprehensive service. More related

联系我们Contact us

  • 咨询热线:0531-85717458 13705446998
  • 公司地址: 山东省德州市齐河安头乡企巢工业园
  • 扫码联系我们:

截屏,微信识别二维码

微信号:13705446998

//