一台双组分打胶机是由数千的零部件组成的，其中较为重要的零部件为气缸、各种伺服电机、电磁阀、PLC控制系统、胶嘴和混胶棒等组成。

　　A double component glue machine is composed of thousands of parts, of which the more important parts are cylinder, various servo motors, electromagnetic valves, PLC control system, glue mouth and glue stick.

　　其中胶嘴的材质制定要是那种特质的金属材质，因为胶嘴直接跟玻璃的边缘进行长期接触，尽管接触的力道不会非常的大，但是长期接触也会对胶嘴产生伤害，如果质量较差笔者认为1年左右胶嘴就会彻底报废。

　　The material of the glue mouth is made of the quality of the metal material, because the glue mouth is directly contact with the glass edge for a long time, although the contact force will not be very large, but the long-term contact will also harm the glue mouth. If the quality is poor, the author thinks that the glue mouth will be completely scrapped in 1 years or so.

　　打胶机对于厂房温度、湿度的要求，作为设备来讲打胶机本身对于厂房的温度要求不高，一般应安装在干燥、无粉尘、无腐蚀性气体,温度在0～40度的车间内。同其他设备的要求几乎没有什么太大的区别。

　　For the temperature and humidity of the factory building, the glue machine itself is not high in the temperature of the plant as the equipment. It should be installed in the dry, dust free, non corrosive gas, and the temperature is in the 0~40 degree workshop. There is little difference between the requirements of other devices.

　　关于日常保养维护也相当的简单，如胶管的清洗方面设备会自动判断停机多久，如果停机达到设定的时间了且自动清洗功能没有关系的话，设备会自动对胶管进行清理工作，避免我们因为人员失误或其他问题没有及时清理导致的各种问题出现。

　　The daily maintenance and maintenance is quite simple, such as the hose cleaning equipment will automatically judge how long the equipment will stop, if the shutdown time is set and the automatic cleaning function is not related, the equipment will automatically clean the hose to avoid us because the personnel misuse or other problems are not timely cleaned up. All kinds of problems arise.

　　本文由双组份打胶机为您提供，我们的网站是:http://linshi.jncsjx.com我们将以全心全意的热情为您提供更的服务，欢迎您的访问!

　　This article is provided by the double component glue machine for you. Our website is: http://linshi.jncsjx.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.