双组份打胶机出现花胶的问题无论是进口的立式打胶机还是卧式打胶机都会经常出现的一种故障，双组份打胶机一般出现花胶这种故障大多是由以下几个原因导致的。
　　A two-component glue machine it is a question whether the fault will often imported vertical glue machine or horizontal gluing machine, two-component glue machine generally it is mostly the fault caused by the following reasons.
　　1、双组份打胶机的混胶器内胶体过多固话，阻力增大。
　　1, the colloid in the double component glue machine is too much colloid, and the resistance is increased.
　　2、A或B胶胶桶内无胶，胶已用完。
　　2, A or B glue barrel has no glue, the glue has been used out.
　　3、A或B胶胶桶内有空气。
　　There is air in 3, A or B rubber buckets.

　　4、针阀或单向阀堵塞。我们仔细观察小编所写的导致花胶的故障原因会发现大多是由于设备没有定期维护清洗导致的。所以我们一定要牢记设备一定要定期维护清洗的良好习惯。
　　4, needle valve or one-way valve blockage. We carefully observe the small write failure reason it will find mostly because the device is not regular maintenance cleaning result. So we must keep in mind that the equipment must maintain the good habit of cleaning regularly.
　　一种情况是由于我们将打胶机的打胶速度设置的过快导致的。有的客户为了加快自己的生产节奏追赶生产计划，将打胶速度认为调整的过快，导致胶体还没有完全达到合格标准机头就已经移动到下一个位置进行打胶操作了.
　　One of the cases is that we set the sizing speed of the glue machine too fast. In order to speed up their production rhythm and catch up with production plan, some customers think that the speed of glue is too fast, which leads to the fact that the gel has not yet reached the standard of qualification, and the machine head has moved to the next location to do glue operation.
　　如果我们需要加快打胶的速度调整了打胶机的移动参数的话，那么我们对应的也应该对供胶系统也进行相应的设置，比如这时候我们就需要加大供胶压力，增大打胶机的出胶速度来配合对象的移动速度的增加。
　　If we need to accelerate the speed of adjustment of the glue glue machine the movement parameters, then we should also carry out corresponding setting on the glue supply system, for example, this time we need to increase the glue supply pressure, increase the speed of glue machine glue to match the speed of the moving object shift increases.
　　如果我们仅仅是单独的增加了打胶机的移动速度而没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。另外一种情况跟打胶机的速度差不多就是我们的供胶压力不足导致的。
　　If we increase the speed of the glue machine alone instead of adjusting the pressure, it is very likely that we will not get enough glue. The other is about the speed of the rubber machine, which is caused by our lack of adhesive pressure.
　　产生打胶不饱满的原因可以参考种情况。除了以上小编说的人为原因导致的这个故障以外设备的零部件损坏也会导致这个问题，比如机头感应器损坏。
　　The reason why the glue is not full can be referred to the first situation. Damage to the parts of the equipment, such as the head inductor damage, can also be caused by the damage to the parts of the equipment other than the man-made causes mentioned above.
　　公司始终坚持不断进行管理创新和科研创新，将以优良的品质、的售后服务赢得广大客户的信赖与支持，欢迎广大新老客户来我公司实地考察，洽谈合作！
　　The company always insists on continuous management innovation and research innovation, and will win the trust and support of our customers with excellent quality and perfect after-sales service. Welcome new and old customers to come to our company for field visits and discuss cooperation.