操作人员应经常检查打胶机设备上的气管、胶管，防止这些管子老化破裂、漏气，避免这些问题可以增加安全。
　　The operators should regularly check the trachea and hose on the rubber machine equipment to prevent these pipes from aging and cracking and air leakage, so as to avoid these problems to increase safety.
　　双组份打胶机是从人工到自动化的一个重大转变。它包含了机械、电气、PLC程序的编写等。很好地诠释了机电一体化技术的非凡应用。是机电一体化朝着智能化、模块化、绿色化的佳体现。
　　The double component glue machine is a major change from manual to automation. It includes the compilation of mechanical, electrical, PLC programs and so on. It is a good interpretation of the extraordinary application of mechatronics. It is the best embodiment of the mechatronics, the intellectualization, the modularization and the green.
　　在次使用新买的打胶机设备时，要注意检查设备是否完好无损、有无松动脱落现象。因为打胶机在运输过程中很可能因受到各种震动而使得机器设备上的各连接处有松动或者脱落，这就需要在检查完确认没问题过后才能投入使用。如果出现问题，应及时给予解决方可投入使用。
　　In the first use of new buy rubber machine equipment, pay attention to check whether the equipment is intact, there is no loosening and falling off. Because the rubber machine is likely to be loosened or dropped due to all kinds of vibration during the transportation process, so it is necessary to put into use after checking the confirmation. If there is a problem, the solution should be put into use in time.

　　压缩空气送入胶瓶（注射器），将胶压进与活塞室相连的进给管中，当活塞处于上冲程时，活塞室中填满胶，当活塞向下推进滴胶针头时，胶从针嘴压出。滴出的胶量由活塞下冲的距离决定，可以手工调节，也可以在软件中控制。
　　Compressed air into the plastic bottle (injector), the rubber pressure into the piston chamber is connected with the feed tube, when the piston is in the up stroke, the piston chamber filled with glue, glue when the piston pushes down the needle, needle from the mouth out of glue. Glue drop out is determined by the distance of the piston down, can be manually adjusted, can also control the software.
　　可提高点胶速度，改善点胶环境，提高点胶质量。通过利用气压和以微处理器为基础的定时装置来调节涂敷到部件上的流体量，替代了操作员的人为猜测。
　　The adhesive speed can be improved, the adhesive environment is improved, and the quality of the glue can be improved. By using the pressure and microprocessor based timing devices to regulate the amount of fluid applied to the components, the artificial guess is replaced by the operator.
　　在打胶机的使用过程中，要注意不要用手去触摸该设备上的任何部位，不要去触摸控制箱内电路板上的元件，尤其禁止带电插拨，情节严重则会导致人身触电和损坏设备。
　　In the process of using glue machine, we must pay attention not to touch any part of the device with hands, do not touch the components on the circuit board of the box, especially prohibit electrified plugging. If the circumstances are serious, the body will be electrified and damaged.
　　我们用满腔的热情、无限的激情对待工作和客户，我们愿意用勤奋的努力和您一起共铸美好明天！
　　We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!