一、混合比例

1、 Mixing ratio

双组份灌胶机主要用于混合A、B两种不同材料的胶水，因此混合比例是一个非常重要的参数。通常情况下，双组份灌胶机的混合比例在1:1到10:1之间，具体视需求而定。

The two-component glue dispenser is mainly used to mix glue from two different materials A and B, so the mixing ratio is a very important parameter. Normally, the mixing ratio of a two-component glue dispenser is between 1:1 and 10:1, depending on the demand.

二、灌胶速度

2、 Gluing speed

灌胶速度是指灌胶机每分钟能够灌胶的数量。灌胶速度受到多个因素的影响，包括灌胶液体的黏度、灌胶头的尺寸和灌胶管的长度等。在选择双组份灌胶机时，需要根据具体需求选择适当的灌胶速度。

The dispensing speed refers to the amount of glue that the dispensing machine can dispense per minute. The dispensing speed is influenced by multiple factors, including the viscosity of the dispensing liquid, the size of the dispensing head, and the length of the dispensing tube. When selecting a two-component gluing machine, it is necessary to choose the appropriate gluing speed according to specific needs.

三、灌胶压力

3、 Glue filling pressure

灌胶压力是指灌胶机将胶水压入产品中的力量。灌胶压力的大小会影响产品的质量，因此需要根据实际需求调整灌胶压力。通常情况下，灌胶压力在0.1MPa到30MPa之间，具体视产品需求而定。

Gluing pressure refers to the force exerted by the gluing machine to press glue into the product. The size of the glue pressure can affect the quality of the product, so it is necessary to adjust the glue pressure according to actual needs. Normally, the glue filling pressure is between 0.1MPa and 30MPa, depending on the product requirements.

四、胶管长度

4、 Rubber hose length

胶管长度是指双组份灌胶机灌胶时胶水流经的管道长度。胶管长度的大小会影响灌胶速度和灌胶压力，因此需要根据实际需求选择合适长度的胶管。

The length of the rubber hose refers to the length of the pipeline through which the glue flows during the application of a two-component glue dispenser. The length of the hose can affect the dispensing speed and dispensing pressure, so it is necessary to choose the appropriate length of hose according to actual needs.

以上就是双组份灌胶机的主要参数介绍。另外，一些常见的问题也需要注意：

The above is an introduction to the main parameters of the two-component gluing machine. In addition, some common issues also need to be noted:

1. 如何清洗双组份灌胶机？

How to clean the two-component glue dispenser?

对于双组份灌胶机清洗，需要将其引出来的管道和容器都清洗干净。可以使用一些专门的清洗液体，在清洗完成后要注意清晰干净。

For the cleaning of the two-component glue dispenser, it is necessary to clean the pipes and containers that are led out. You can use some specialized cleaning liquids and pay attention to cleanliness after cleaning.

2. 什么情况下需要更换灌胶机的灌胶头？

2. When do I need to replace the dispensing head of the dispensing machine?

灌胶头磨损或老化会影响双组份灌胶机的灌胶质量，需要及时更换。通常情况下，灌胶头的寿命可能会根据实际需求进行调整。

Wear or aging of the dispensing head can affect the dispensing quality of the two-component dispensing machine and requires timely replacement. Under normal circumstances, the lifespan of the dispensing head may be adjusted according to actual needs.