第一、在运用设备水泵之前要保证水箱里的水是满足的，打开水泵之后要及时调整海绵辊上方的喷水管，保证海绵辊的每一个方位能够被冲刷掉。冲刷时要用手清洗杂质和赃物，力度不要太大。值得留神的一点是在冬季打开中空玻璃设备时要先将海绵辊浸泡开在清洗传送，直接清洗传送简单将海绵辊被撕坏。

Firstly, before using the equipment water pump, ensure that the water in the water tank is sufficient. After turning on the water pump, adjust the spray pipe above the sponge roller in a timely manner to ensure that every position of the sponge roller can be washed away. When flushing, impurities and dirt should be cleaned by hand, and the force should not be too strong. It is worth noting that when opening the insulated glass equipment in winter, the sponge roller should be soaked before cleaning and conveying. Directly cleaning and conveying can easily tear off the sponge roller.

第二、在清洗传送时，中空玻璃在传送带上要保证玻璃的平稳，没有放平稳的玻璃在传送时简单下跌下来形成玻璃的摔裂和伤到操作者。

Secondly, when cleaning the conveyor belt, it is necessary to ensure the stability of the insulated glass on the conveyor belt. Glass that has not been placed stably may fall down during transportation, causing glass breakage and injuring the operator.

第三、在涂改胶时要均匀，中空玻璃设备铝隔条上是需求涂改丁基胶的，在涂改是要保证均匀，全面，胶体涂改后要平坦无漏胶，无毛刺状况。为保证铝条与玻璃的粘接作用，主张运用丁基胶，且铝隔条上不要占有灰尘与杂物。

Thirdly, when applying adhesive, it should be uniform. Butyl adhesive needs to be applied to the aluminum partition strip of the hollow glass equipment. During the application, it should be ensured to be uniform and comprehensive, and the colloidal coating should be flat, without glue leakage or burrs. To ensure the adhesion between the aluminum strip and the glass, it is recommended to use butyl adhesive, and the aluminum partition strip should not contain dust and debris.

第四、中空玻璃设备的双组份密封胶涂改要健壮，拐弯处的涂改尤为留神均匀性，这样有利于漏气现象的发生。

Fourthly, the two-component sealant coating of hollow glass equipment should be robust, and the coating at corners should be particularly careful of uniformity, which is conducive to the occurrence of air leakage.