热熔胶涂布机可将固态的热熔胶熔化，并通过加压装置将熔化后变为液态的胶输送到胶涂布装置对基材实行涂布。集精确温度控制功能﹑流体加压输送功能和挤出涂布功能于一体的机电设备。另具备自动控制及自动跟踪生产线速度的功能。

The hot melt adhesive coating machine can melt solid hot melt adhesive and transport the melted liquid adhesive to the adhesive coating device through a pressure device for coating the substrate. A mechanical and electrical equipment that integrates precise temperature control function, fluid pressure conveying function, and extrusion coating function. It also has the function of automatic control and automatic tracking of production line speed.

主机:具备加热保温,熔化胶液,输出胶液,控制胶液压力,初级过滤等功能.主机温度应控制在比胶液熔点温度高5-10度.使之具有一定的流动性.使压力控制更为准确.

Host: It has functions such as heating and insulation, melting glue liquid, outputting glue liquid, controlling glue liquid pressure, and primary filtration. The host temperature should be controlled 5-10 degrees higher than the melting point temperature of the glue liquid to provide a certain degree of fluidity and more accurate pressure control

喉管:具备加热保温,导流胶液的作用,将液态热熔胶由主机输出枪座模块的功能.温度保持在稍高于胶液熔点温度即可。

Throat: It has the functions of heating and insulation, guiding the adhesive liquid, and outputting the liquid hot melt adhesive from the host to the gun seat module. The temperature should be kept slightly higher than the melting point of the adhesive liquid.

枪座:具备加热保温,二级过滤.并将胶液输送枪体.并视需要,加热压缩空气的功能.可视喷胶效果适当提高温度。使胶液流动性更好。

Gun holder: equipped with heating and insulation, secondary filtration, and the ability to transport the glue solution to the gun body. It also has the function of heating compressed air as needed. The temperature can be appropriately increased based on the visible spraying effect. Improve the fluidity of the adhesive solution.

枪体:具备打开及关闭胶液的功能.并按需求配套各种喷嘴及刮嘴.以满足用户的需求.有螺旋喷枪，涂布刮枪，纤维喷枪，Z字型喷枪，点状枪等等。

Gun body: It has the function of opening and closing the adhesive liquid. It is equipped with various nozzles and scrapers according to the needs to meet the needs of users. There are spiral spray guns, coating scraper guns, fiber spray guns, Z-shaped spray guns, dot guns, etc.

自动补偿控制系统：具备输出信号控制电磁阀，由电磁阀控制的压缩空气带动枪体的工作来控制胶液的打开及关闭。并输出0-10V 直流电压控制变频器带动马达转动。输出电压与被被测生产线速度成正比。可在线调整胶位、断胶长度及跟踪电压。检测生产线速度的装置有接近开关，旋转编码器等。

本文来自：卧式丁基胶涂布机更多的内容请点击：http://www.jncsjx.com我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！

Automatic compensation control system: equipped with output signal control solenoid valve, the compressed air controlled by the solenoid valve drives the operation of the gun body to control the opening and closing of the adhesive liquid. And output 0-10V DC voltage to control the frequency converter to drive the motor to rotate. The output voltage is directly proportional to the speed of the tested production line. The adhesive position, broken adhesive length, and tracking voltage can be adjusted online. The devices for detecting the speed of the production line include proximity switches, rotary encoders, etc. This article is from: Horizontal butyl rubber coating machine. For more content, please click: http://www.jncsjx.com We will provide satisfactory service for the questions you ask. Welcome to call us!