花胶是由于A/B组分胶体混合不均匀而产生的，表现为局部有白色条纹。主要原因有：⑴打胶机B组分管道堵塞;⑵静态混合器长时间未清洗;⑶比例尺松动，出胶速度不均匀;⑷换厂家或牌号未调整设备工艺参数;针对原因⑴、⑵，可以通过清洗设备来解决;针对原因⑶，则需要检查比例控制器，并进行适当的调整。

　　It is because the A/B component colloidal uneven mixing generated by the performance of the local white stripes. The main reasons are: (1) blockage of the B component pipe of the glue machine; (2) the static mixer has not been cleaned for a long time; (3) the scale is loose and the speed of the glue is not uniform; (4) changing the manufacturer or brand not to adjust the technical parameters of the equipment; for the reasons (1) and (2), it can be solved through the cleaning equipment; in view of the reasons, the proportion controller needs to be checked and carried out. Proper adjustment.

　　当双组份胶在混合过程中就发生局部固化时，胶枪打出来的胶就会出现结皮或硫化现象。当固化和出胶速度均无异常，而打出的胶仍有结皮或硫化现象时，则可能是设备停机时间较长，胶枪未清洗或洗枪不够彻底，需要将结皮或硫化胶冲洗干净后后施工。

　　When the two component glue is locally solidified in the mixing process, the glue produced by the glue gun will appear crust or vulcanization. When the speed of curing and sizing is not abnormal, and the rubber still has the phenomenon of crust or vulcanization, it may be that the equipment stop time is longer, the rubber gun is not cleaned or the washing gun is not thorough enough, it is necessary to rinse the crust or vulcanizate after washing.

　　如果B组分出现颗粒结块粉化现象，原因有两个：一是使用前上层已出现该种现象，这是由于包装密封不好，B组分中的的交联剂或偶联剂均为活性化合物，易于空气中的水气发生反应，该批次应退回生产厂家。二是在使用过程中停机，再次开机时出现颗粒结块粉化现象，说明打胶机的压盘与胶料的密封欠佳，应与设备方联系解决问题。

　　There are two reasons for the phenomenon of particle agglomeration in the B component. One is that this phenomenon appears before the use of the upper layer. This is due to the poor packing seal. The crosslinker or coupling agent in the B component is the active compound, which is easy to react with the air in the water and gas. This batch should be returned to the manufacturer. The two is to stop in the process of use, and when the machine is reopened again, there is the phenomenon of particle caking powder. It shows that the sealing of the press plate and the glue is not good. It should be contacted with the equipment to solve the problem.

　　以上便是双组份打胶机今天的分享，您还满意吗，欢迎关注我们的网站:http://www.jncsjx.com并且关注我们的产品，我们将为您提供优良的产品，衷心的愿与您建立合作关系。

　　The above is the sharing of double component glue machine today, are you satisfied, welcome to our website: http://www.jncsjx.com and pay attention to our products, we will provide you with excellent products and