双组份打胶机分为自动、半自动和全自动三种，很多购买的客户不明白怎么开机，以及怎么操作，那么昌盛给大家讲一下是如何来做的。
The two-component gluing machine is divided into automatic, semi-automatic and fully automatic. Many customers do not understand how to start the machine and how to operate it. So Changsheng will tell you how to do it.
1 要了解为什么要使用双组份打胶机来工作
First of all, we should understand why we should use the two-component glue machine to work
设备使用的重要性：中空玻璃在制作过程中，有一个环节是非常关键的，就是用结构胶将两片玻玻璃彻底密封，由于人工打胶慢，封闭不好，所以大量的生产中空玻璃就需要设备。
In the production of glass, the key is to use a large amount of sealant in the production process.
双组份打胶机的操作方法：
Operation method of two-component gluing machine:
1 打开气泵开关，电源总开关，控制台开关，在控制台按手动按钮
1. First turn on the air pump switch, the main power switch and the console switch, and press the manual button in the console
2 然后在显示屏上找到原点设定，点击辅助原点设定，然后点击头部原点设定
2. Then find the origin setting on the display screen, click the auxiliary origin setting, and then click the head origin setting
3 注意原点设定时避免头部和辅助吸盘碰撞。等设定好然后返回找到玻璃厚度设定
3. Pay attention to avoid collision between the head and the auxiliary suction cup when setting the origin. After setting, return to find the glass thickness setting
4 先是玻璃的厚度然后是铝隔条然后还是玻璃的厚度
First the thickness of the glass, then the aluminum spacer, and then the thickness of the glass
5输入完以后，点击设置进入。等命令位置和当前位置数值一致即可，注意设置时传送带上不要有玻璃。
5 after input, click settings to enter. Wait for the command position to be consistent with the current position value. Pay attention to no glass on the conveyor belt when setting.

双组份打胶机操作时情况分析：
Analysis of the operation of the two-component glue applicator:
1 开始打胶要看每条边每个角打胶是否均匀
1. To start gluing, you should see whether the glue is evenly applied on each edge and corner
2 在屏幕上点击返回找到密封配方，点击进入，会显示当前密封压力
2 on the screen, click back to find the sealing formula, and click enter to display the current sealing pressure
3 如果每条边都缺胶，那么可增加压力，压力大胶量大，压力小胶量就小。
3. If each side is short of glue, the pressure can be increased. If the pressure is large, the glue quantity is small when the pressure is small.