双组份打胶机是一种工业设备，主要用于自动计量混合双组份AB胶水，并进行打胶操作。以下是关于双组份打胶机的详细信息：

The two-component glue machine is an industrial equipment mainly used for automatically measuring and mixing two-component AB glue, and performing glue application operations. The following is detailed information about the two-component gluing machine:

工作原理

working principle

双组份打胶机通过两个独立的泵系统分别吸取A组份和B组份的胶水，在混合室内进行充分搅拌和混合后，经过灌装机等后续设备完成打胶工作。其基本工作原理是利用压缩空气将胶水压进与活塞室相连的进给管中，当活塞处于上冲程时，活塞室中填满胶水，当活塞向下推进滴胶针头时，胶水从针嘴压出，滴出的胶水量由活塞下冲的距离决定，可以手工调节，也可以在软件中控制。

The two-component gluing machine uses two independent pump systems to extract the glue of component A and component B respectively. After thorough mixing and blending in the mixing chamber, the gluing work is completed by subsequent equipment such as filling machines. The basic working principle is to use compressed air to press the glue into the feed tube connected to the piston chamber. When the piston is in the upward stroke, the piston chamber is filled with glue. When the piston pushes down the dispensing needle, the glue is pressed out from the needle mouth. The amount of glue dripped is determined by the distance of the piston's downward stroke and can be manually adjusted or controlled in software.

应用领域

application area 

双组份打胶机广泛应用于汽车制造、航空航天、船舶制造、电子电器、建筑装饰等领域。它可以用于各种胶水的施胶，如环氧树脂胶、聚氨酯胶、硅胶等。

The two-component gluing machine is widely used in fields such as automobile manufacturing, aerospace, shipbuilding, electronic appliances, and building decoration. It can be used for applying various adhesives, such as epoxy resin adhesive, polyurethane adhesive, silicone adhesive, etc.

维护周期

Maintenance cycle

对于双组份打胶机的维护保养，以下是一些关键点：

For the maintenance of two-component glue machines, the following are some key points:

日常维护：每天工作结束后，应擦拭设备机身，排放油水分离器积聚的油水，检查气路油雾器的润滑油情况，清除胶枪里的残留胶水，注意压力表读数是否正常，并做好工作日记。

Daily maintenance: After work every day, the equipment body should be wiped, the accumulated oil and water in the oil-water separator should be discharged, the lubricating oil condition of the air path oil mist device should be checked, residual glue in the glue gun should be removed, the pressure gauge reading should be checked for normality, and a work diary should be kept.

一级维护：每周检查机械运动部件的连接和润滑情况，必要时添加润滑脂；每隔15个工作日清洗一次混合器。

First level maintenance: Check the connection and lubrication of mechanical moving parts weekly, and add lubricating grease if necessary; Clean the mixer every 15 working days.

本文由双组份打胶机为您提供，我们的网站 http://www.jncsjx.com我们将以全心全意的热情为您提供服务，欢迎您的访问！

This article is provided by a two-component glue machine on our website http://www.jncsjx.com We will provide you with wholehearted enthusiasm and welcome your visit!