不同的环境会打胶机吗？中空玻璃的订单也连续的添加，部分企业也开端策画扩展规划添加厂子的生产能力采购一些机械设备来替代人工操作。也连续有人在后台问我关于双组份打胶机的相关问题，今日小编在这里跟咱们介绍一下双组份打胶机对环境场所的要求，以便咱们能够做到心中有数。
Orders for hollow glass have also been added, and some companies have begun planning to expand production capacity by adding plants to purchase some mechanical equipment to replace manual operations. Some people have asked me about the two-component glue beater in the background. Today, Xiaobian is here to tell us about the requirements of the two-component glue beater on the environment, so that we can have a good idea.
卧式双组份打胶机是怎样一种设备它关于厂房车间的环境到底有什么要求?不少人对它不是很了解。纵然是人士，关于双组份打胶机的了解，实践上还仅仅停留在它的实践用途上。不过，关于打胶机的了解，停留在它的运用层面现已很难得了。那么，卧式打胶机终究对车间厂房的环境有什么要求呢?
Horizontal two-component glue beater is what kind of equipment it has on earth about the workshop environment what requirements? Many people do not know it very well. Even if it is a professional, the understanding of the two-component glue beater, in practice, only stay in its practical use. However, it is hard to understand the glue machine at its operational level. Then, what is the requirement of the horizontal rubber beating machine for the environment of the workshop?

卧式打胶机不同于立式打胶机。立式打胶机关于厂房面积的要求比较高保存估计也要尽50平米的当地。而小型打胶机关于厂房面积的要求就要小很多了，仅仅需要缺乏10平米的当地就能够寄存，主要的是由于设备体积小能够任意摆放，不需要专门为打胶机腾出空间来寄存。打胶机关于地上平坦度的要求，这个也是近期我厂参与北京世界玻璃展览会是被问道多的问题。小型卧式打胶机关于地上的平坦度要求不是十分高，设备在初研制阶段咱们的工程师现已考虑到地上平坦度的问题了所以在研制的过程中也侧重的处理这个问题。咱们在设备傍边专门添加了一个特别装置来处理地上不平坦对打胶机打胶的影响。当然小编这也要着重一下尽管设备对地上的平坦度要求不高，但是也不能满地是坑坑洼洼的。
Horizontal rubber beating machine is different from vertical rubber beating machine. Vertical glue machine on the factory area requirements are relatively high, preservation is estimated to be as much as 50 square meters of local. And the small glue machine in the workshop area requirements will be much smaller, just need to lack 10 square meters of local can be deposited, the main reason is that the equipment is small in size can be placed arbitrarily, do not need to make room for the glue machine to deposit. The requirement of the smoothness of the gluing machine on the ground is also the most frequently asked question for our factory to participate in the Beijing World Glass Exhibition recently. The flatness requirement of the small horizontal glue beater on the ground is not very high. Our engineers have considered the flatness of the ground in the initial development stage of the equipment, so they also focus on dealing with this problem in the development process. We have added a special device to the side of the equipment to deal with the impact of unevenness on the glue beater. Of course, it is also important to note that although the equipment on the ground flatness requirements are not high, but also can not be full of pits and holes.
打胶机关于厂房温度、湿度的要求，作为设备来讲打胶机自身关于厂房的温度要求不高，一般应安装在干燥、无粉尘、无腐蚀性气体,温度在0～40度的车间内。同其他设备的要求几乎没有什么太大的差异。
Glue beater in the plant temperature, humidity requirements, as equipment, glue beater itself on the plant temperature requirements are not high, generally should be installed in dry, dust-free, non-corrosive gas, temperature in the workshop of 0-40 degrees. There is hardly much difference with the requirements of other devices.

（）文章由双组份打胶机编写，更多双组份打胶机资讯欢迎关注我们 http://www.jncsjx.com）