双组份打胶机操作流程是怎么样的
What is the operation procedure of the two component glue machine?
因双组份打胶机是全气动操控机型,为了运用户更好地运用好该设备,故主张在运用前有必要仔细阅读本说明书并严峻遵照下列要求进行操作
Since the two-component glue beater is a fully pneumatic control machine, in order to make better use of the equipment, it is advisable to read this instruction carefully before using it and operate it strictly in accordance with the following requirements
1.接通气源:本机预留气管接口为PU12快插接头。气源接通,调度减压阀0.4~0.6Mpa,检查体系有无漏气现象。然后试运行以下动作:1.A泵前进;2.A泵充气;3.B泵前进;4.B泵充气。留心:前进气缸前进时,假定两气缸不同步,请下降原点后从头操作。
1. connect the gas source: the air interface is reserved for PU12 quick connector. The gas supply is connected, and the pressure reducing valve is sent to 0.4~0.6Mpa to check whether the system has any air leakage. Then test run the following actions: 1.A pump forward; 2.A pump inflation; 3.B pump forward; 4.B pump inflation. Caution: when the forward cylinder is advancing, suppose the two cylinder is out of sync, please descend to the origin and operate from the beginning.
2.将A、B组份胶桶就位,并与A、B胶泵的轴线对中。以A组份为例:
2. place the A and B components of the plastic bucket in line with the axis of the A and B glue pumps. Take A component as an example:
1、操作手动转阀,将A泵前进高,前进过程中查询各管路有无拉伸过紧处。
1. Operate the manual rotary valve, move the A pump to the highest level, and inquire whether the pipelines are stretched too tight during the progress.
2、将胶桶放置在。的双组份打胶机错,咱们这用了几台双组份打胶机都是他家的,质量很好。
2, place the plastic bucket. The two component glue machine is wrong. We used several two component glue machines in our home. The quality is very good.

中空玻璃机需不需要双组份打胶机
Do you need a two component glue machine for the hollow glass machine?
在中空玻璃机器的运用中,配套的打胶设备一贯存在争议,现在出口国外的打胶设备悉数为 双组份打胶机,而国内常常有厂家会推销热熔胶打胶机,双组份涂胶机是出产中空、幕墙玻璃的专用设备,可一次完毕二道密封中A、B组份混合与涂胶。适用配比精度高的胶种,满意玻璃深加工企业高、高合格率流水线作业的出产需求该机消化吸收美国技术,纯气动马达。机架选用全体焊接,龙门架、焊接三角形构成安稳结构,打败悬臂梁作业时的摇晃,B泵选用双立柱,压盘双道密封,彻底处理黑组份胶易氧化走漏的难题;优化管路规划,处理产品流速慢的问题。出产热熔胶式。
In the use of hollow glass machines, the matching gluing equipment has always been controversial. Now all the gluing equipment exported abroad is a two-component gluing machine, and domestic manufacturers will often promote hot-melt gluing machine. The two-component gluing machine is a special equipment for producing hollow, curtain wall glass. It can complete the mixing of A and B components in two seals at one time. And gelatinized. It is suitable for the high precision glue, and satisfies the production requirement of high efficiency and high qualified production line in glass deep processing enterprises. The machine digests and absorbs American advanced technology and pure pneumatic motor. The frame adopts all welding, gantry frame and welding triangle to form a stable structure to defeat the shaking of the cantilever beam. The B pump adopts double columns and pressure plate with double seals to thoroughly deal with the problem of oxidation and leakage of black component glue. The pipeline planning is optimized to deal with the problem of slow product flow. Produce hot melt adhesive.
济南昌盛机械,双组份打胶机有需要朋友可以关注我们http://linshi.jncsjx.com，敬请期待更多精彩内容。
Jinan Changsheng Machinery, two-component glue beater need friends can pay attention to our http://linshi.jncsjx.com, please look forward to more exciting content.