双组份打胶机怎么挑选胶水
How to choose glue for two component glue machine?
业界将胶水按粘料特点分为动物胶、植物胶、无机物及矿藏、组成弹性体、组成热塑性资料、组成热固性资料、热固性、热塑性资料与弹性体复合几种。比较常见的AB胶水、瞬间胶、厌氧胶水、UV胶水及一些特别胶水。
The industry divides glue into animal glue, vegetable glue, inorganic substance and mineral deposit, elastomer, thermoplastic material, thermosetting material, thermosetting material, thermoplastic material and elastomer composite. More common AB glue, instant glue, anaerobic glue, UV glue and some special glue.
胶水在运用过程中，要确定的是胶水份额。比方AB胶水，将主剂与硬化剂按1:1的份额混合，在保证被凃物表面清洁之后再将胶水涂抹被涂物。将温度控制在六十度到九十度为佳。瞬间胶在运用过程中经常遇到白化，脆性大，不耐老化的问题。运用前好先做试验，保证胶水的粘结能够到达预期效果。厌氧胶就是缺氧胶，可用于粘接也可用于密封。厌氧胶因其具有共同的厌氧胶固化特性，可运用于锁紧、密封、固持、粘接、堵漏等方面。厌氧胶已成为机械职业不行短少的液体东西。在航空航天、军工、汽车、机械、电子、电气等职业有着很广泛的运用。
In the course of using glue, the glue share must be determined. For example, AB glue, mix the main agent and hardener in a 1:1 ratio, and then apply the glue to the coating after ensuring that the surface of the object is clean. The best way to control temperature is from sixty degrees to ninety degrees. During the use of instant adhesive, whitening, brittleness and ageing resistance are often encountered. It is better to do experiments before making use of the glue so as to ensure the glue can reach the expected effect. Anaerobic adhesive is anoxic glue, which can be used for bonding and sealing. Anaerobic adhesives have the same curing characteristics of anaerobic adhesives, which can be used in locking, sealing, fixing, bonding, leak plugging and so on. Anaerobic adhesive has become a liquid substance that can not be short of mechanical occupation. It has been widely used in aerospace, military, automobile, machinery, electronics, electrical and other occupations.

UV胶水。UV是英文Ultraviolet Rays的缩写，因此UV胶水又叫做紫外线胶。由于UV胶水的特别性，往往还要配合UV点胶针筒进行点胶作业。由于它的无污染，无溶剂，因此广泛运用于各个点胶作业。还有一些特别胶水，如猫眼胶，钻石胶，以及一些职业专用胶水，如手表专用胶水。
UV glue. UV is the abbreviation of English Ultraviolet Rays, so UV glue is also called UV glue. Because of the special characteristics of UV glue, UV dispensing syringe is often used for dispensing operations. Because it is non polluting and solvent free, it is widely used in dispensing operations. There are also some special glues, such as cat's eye glue, diamond glue, and some professional glue, such as watch glue.
打胶过程中的几个小注意点：
Several small points in the process of glue making:
1.很多胶水（比方一些瞬间胶）的气味都很冲鼻，所以要在保证点胶作业在一个通风的工作环境下进行。
1. A lot of glue (e.g. instant glue) smells nasal, so make sure that dispensing is done in a ventilated working environment.
2.除非是点胶需求，不然不要将不同的胶水混合装于一个容器里。运用完胶水，将胶水放置于阴凉通风枯燥，且不易触碰到的当地。拧紧胶盖，防止胶体走漏。当有很多走漏时能够用水固化后再刮除。
2. unless glue is needed, do not mix different glue in a container. After applying glue, place glue in a cool, ventilated, dry place that is not easy to touch. Tighten the rubber cover to prevent colloid leakage. When there are many leaks, it can be cured with water and then scraped.
3.操作时，记住要带阻隔手套。假如不小心沾到手上，未干时应该用酒精查擦洗或许以温肥皂水浸泡，用丙酮、解胶剂去除，不然等胶水干了今后，就只能用刀具进行胶水铲除。假如触及皮肤或眼睛，应先用清水冲刷然后用温热毛巾热敷，之后当即就医。
3. remember to wear gloves when operating. If accidentally dipped in the hands, not dry should be scrubbed with alcohol or soaked in warm soap water, acetone, glue removal, or other glue dry in the future, you can only use a knife glue eradication. If you touch the skin or eyes, wash them with clean water and apply them with warm towels. See a doctor immediately afterwards.
济南昌盛机械，对双组份打胶机感兴趣的朋友可以关注我们http://linshi.jncsjx.com，敬请期待更多精彩内容。
Jinan Changsheng Machinery, the two-component glue beater interested in friends can pay attention to our http://linshi.jncsjx.com, please look forward to more exciting content.