双层中空玻璃起雾的原因和处理办法
Causes and treatment of fog in double deck insulating glass
窗户是在装求学中特别重要的部分，不仅能起到抗风挡雨的作用，还能对房子起到隔音保温作用。所以，在进行窗户的装修时，越来越多的人会运用双层中空玻璃窗，但是双层玻璃窗起雾怎么办呢？
Window is a very important part of decoration and study, not only can play a role in wind and rain protection, but also play a sound insulation and insulation of the house. Therefore, in the decoration of windows, more and more people will use double-layer hollow glass windows, but double-layer glass window fog how to do?
中空玻璃起雾的处理方法
Treatment of fog in insulating glass
1.若是因密封胶未封紧密而形成的中空玻璃起雾的现象，则可将中空玻璃上的密封胶用东西撤除，并从头将玻璃窗清洗干净，待其枯燥后，再进行玻璃密封胶的涂刷工艺。
1. If the sealing glue is not tightly sealed, the sealing glue on the hollow glass can be removed with something, and the glass window can be cleaned from the head, and then the glass sealant brushing process can be carried out after it is dry.
2.若双层中空玻璃窗的水槽方位未装置好，则要将中空玻璃窗撤除掉，并进行从头装置。
2. If the flume position of the double-layer hollow glass window is not well installed, the hollow glass window should be removed and installed from scratch.
3.若双层中空玻璃中隔条已装置好，则可在双层玻璃窗上增加玻璃垫片。另外还能够将其上原有的中隔条除掉，在从头装置上隔条，要注意隔条的张贴方位要与玻璃窗的边际部分保持必定的间距，一般是2mm为适宜。且在装置玻璃窗时，要注意不要在隔条上沾上水，避免影响其的装置质量。若是温差相差过大而引起的起雾现象，则可将窗户翻开一会，让室表里的温差的距离变小，待其的上雾气散去停止。
3. if double insulating glass septum is installed, glass gaskets can be added to double glazing. In addition, it can also be removed from the original separator, separator from the scratch device, pay attention to the location of the separator to maintain a certain distance with the edge of the glass window, generally 2 mm is the most appropriate. And when installing glass windows, be careful not to put water on the septum, so as to avoid affecting the quality of the device. If the temperature difference is too large and caused fog phenomenon, you can open the window for a while, so that the room surface temperature difference between the distance becomes smaller, until the fog dispersed to stop.

中空玻璃起雾原因
Causes of fog in insulating glass
1.中空玻璃窗在装置时，其的施工工艺欠安，在运用必定的时刻后，其中的密封胶发作开裂的现象，导致水汽进入中空玻璃的夹层中，随着温度的升高，水汽蒸发，在与玻璃面触摸时，变为小型的水珠，然后导致双层玻璃起雾的现象。
1. The construction technology of the hollow glass window is unsafe when it is installed. At certain time of operation, the sealant cracks, causing water vapor to enter the interlayer of the hollow glass. With the increase of temperature, the vapor evaporates, becomes small droplets when touching the glass surface, and then causes the fog of the double-layer glass. Phenomenon.
2.双层中空玻璃在装置时，因为里边的水槽未装置好，导致他的水面高于型材，然后导致水流流入双层玻璃的夹层中。在阳光的照射下，水蒸气构成雾气，然后形成双层玻璃的起雾现象。
2. When the double-layer hollow glass is installed, because the inner flume is not installed properly, the water surface of the double-layer hollow glass is higher than the profile, and then the water flows into the double-layer glass sandwich. Under the sunlight, steam forms fog and then forms fog in double glazing.
3.中空玻璃在装置时，假如隔条在进行张贴时，与玻璃的边际处没有留必定的缝隙，则其在于雨水触摸时，会将雨水吸附到双层玻璃上，然后导致双层玻璃发作起雾的现象。若室内的温度与室外的温度相差过大，且其室内的空气湿度过大，就会发作双层玻璃起雾的现象。
3. Hollow glass in the device, if the partition in the paste, and the glass edge does not leave a certain gap, it is in the rain touch, the rain will be adsorbed to the double-layer glass, and then lead to double-layer glass fog phenomenon. If the temperature difference between indoor and outdoor is too large, and the indoor air humidity is too high, it will occur double-glazing fogging phenomenon.
济南昌盛机械,对双组份打胶机定做感兴趣的朋友可以关注我们网站http://linshi.jncsjx.com，更多精彩内容欢迎来电咨询，谢谢！！
Jinan Changsheng Machinery, the two-component glue beater customized interested friends can pay attention to our website http://linshi.jncsjx.com, more exciting content welcome to inquire, thank you!