中空玻璃设备根本保养知识须知

时间:2018-11-27 来源:http://www.jncsjx.com/ 发布人:昌盛机械

中空玻璃设备根本保养知识须知
Notice of Basic Maintenance Knowledge for Hollow Glass Equipment
要使得中空玻璃设备使用作用理想,玻璃清洗彻底干净,大程度的延伸其使用寿命,就必需要留意其根本的保养知识。在设备使用过程中留意对其进行正确的保养。怎么保养,如此表明。
In order to make the hollow glass equipment work well, clean the glass thoroughly and extend its service life to the greatest extent, it is necessary to pay attention to its basic maintenance knowledge. Pay attention to the correct maintenance of the equipment during its use. How to maintain, experts say so.
中空玻璃设备的保养总体方法不难,要害是要做好对设备滑轮的保养光滑,确保作业时分的电压安稳,预防电机出现烧毁的状况,确保设备能够正常运行就可以了。
Hollow glass equipment maintenance overall method is not difficult, the key is to do a good job of equipment pulley maintenance smoothly, to ensure the voltage stability during operation, to prevent motor burnout, to ensure the normal operation of the equipment.
如果设备在作业期间发生了重大的故障,那么就需要聘请的维修人员前来处理。非人员切莫私行拆机维修。此外需要留意的一点是,当故障发生需要检修的时分,必需要先把总电源给切断了。除外,还需要留意的事项包含如下:
If the equipment has major failures during operation, professional maintenance personnel should be hired to deal with them. Non-professionals should not dismantle and repair machines privately. In addition, it should be noted that when a fault occurs and needs to be repaired, the total power supply must be cut off first. In addition, the following items need to be noted:

双组份打胶机
1.对传送辊的保护。中空玻璃设备的要害零件传送辊必需要留意定时进行光滑处理,在设备运转之前要先查看器光滑状况,看油位线标是否正常,油位必需要保持在滑标的中心线以上才可以。
1. Protection of conveyor rollers. The key parts of hollow glass equipment conveyor roller must pay attention to smoothing at regular intervals. Before the equipment is running, the smooth condition of the device should be checked to see whether the oil level line is normal or not, and the oil level must be kept above the center line of the slide mark.
2.设备体系的水路保护。设备内的水箱要确保体系水循环的正常,每周要对水箱进行一次彻底的清洗,要对喷水嘴进行惯例性的查看,一旦发现有阻塞就要马上进行疏通清理。此外还有风路的保护,设备风机的运行状况要保持良好安稳。
2. Waterway protection of equipment system. The water tank in the equipment should be cleaned thoroughly once a week to ensure the normal water circulation of the system. The nozzle should be checked routinely. Once the blockage is found, it should be cleared immediately. In addition, there is the protection of the wind path, and the operation condition of the equipment fan should be good and stable.
综上所述有济南昌盛机械提供,想了解更多双组份打胶机知识,欢迎关注我们的网站:http://linshi.jncsjx.com谢谢支持!
In summary, all the above-mentioned Jinan Changsheng Machinery provides, want to know more about the two-component glue machine knowledge, welcome to pay attention to our website: http://linshi.jncsjx.com Thank you for your support!

联系我们Contact us

  • 咨询热线:0531-85717458 13705446998
  • 公司地址: 山东省德州市齐河安头乡企巢工业园
  • 扫码联系我们:

截屏,微信识别二维码

微信号:13705446998

//