中空玻璃生产线是用来生产槽铝式中空玻璃的一体化中空玻璃加工设备。为大家简单介绍一下中空玻璃生产线的构造及功能：

The insulated glass production line is an integrated insulated glass processing equipment used to produce trough aluminum insulated glass. Let me briefly introduce the structure and function of the insulated glass production line for everyone:

1.上片段—将玻璃侧立着放置在生产线右端，电机带动输送轮进入清洗段；

1. Upper segment - Place the glass side upright at the far right end of the production line, and the motor drives the conveyor wheel into the cleaning section;

2.清洗段—由喷水嘴将清洗用水喷在玻璃表面，电机带动毛刷清洗玻璃；

2. Cleaning section - The cleaning water is sprayed onto the surface of the glass by a water spray nozzle, and the motor drives a brush to clean the glass;

3.风干断—清洗后玻璃通过海绵棍，然后，风机通过中空玻璃生产线内置风刀，吹干玻璃上的水渍；

3. Air drying and breakage - After cleaning, the glass is passed through a sponge stick, and then a fan is installed on the hollow glass production line with an air knife to dry the water stains on the glass;

4.合片段—铝框定位机具有玻璃定位以及铝框定位装置，能够完成玻璃定位、铝框安放及两片玻璃对齐合片功能。

4. Segmentation - The aluminum frame positioning machine has glass positioning and aluminum frame positioning devices, which can complete the functions of glass positioning, aluminum frame placement, and alignment and lamination of two pieces of glass.

5.卸片段—出料机的末端设有限位装置，防止玻璃掉下。在电脑程序中规定，当玻璃完全走出合片段后，会自动停下，这时应当及时将玻璃取走，否则会限制前面的输送段等停止运行；

5. Unloading fragments - The end of the discharge machine is equipped with a limit device to prevent the glass from falling off. In computer programs, it is stipulated that when the glass completely exits the closing section, it will automatically stop. At this time, the glass should be removed in a timely manner, otherwise it will limit the operation of the previous conveying section, etc;