The hot melt adhesive coating machine can melt the solid hot melt adhesive and transport the melted liquid adhesive to the adhesive coating device through a pressure device for coating the substrate. An electromechanical device that integrates precise temperature control, fluid pressure delivery, and extrusion coating functions. It also has the function of automatic control and automatic tracking of production line speed.

主机:具备加热保温,熔化胶液,输出胶液,控制胶液压力,初级过滤等功能.主机温度应控制在比胶液熔点温度高5-10度.使之具有一定的流动性.使压力控制更为准确

Host: Equipped with functions such as heating and insulation, melting glue, outputting glue, controlling glue pressure, primary filtration, etc. The host temperature should be controlled at 5-10 degrees higher than the glue melting point temperature to ensure a certain degree of fluidity and more accurate pressure control

喉管:具备加热保温,导流胶液的作用,将液态热熔胶由主机输出至枪座模块的功能.温度保持在稍高于胶液熔点温度即可。

Throat: It has the function of heating and insulation, guiding the glue liquid, and outputting the liquid hot melt glue from the host to the gun base module. The temperature should be maintained slightly above the glue melting point temperature.

枪座:具备加热保温,二级过滤.并将胶液输送至枪体.并视需要,加热压缩空气的功能.可视喷胶效果适当提高温度。使胶液流动性更好。

Gun base: Equipped with heating and insulation, secondary filtration, and the function of conveying glue to the gun body. It can also heat compressed air as needed. The temperature can be appropriately increased according to the visual spraying effect. Improve the fluidity of the adhesive.

枪体:具备打开及关闭胶液的功能.并按需求配套各种喷嘴及刮嘴.以满足用户的需求.有螺旋喷枪，涂布刮枪，纤维喷枪，Z字型喷枪，点状枪等等。

Gun body: It has the function of opening and closing glue, and is equipped with various nozzles and scrapers according to needs to meet user needs. There are spiral spray guns, coating scrapers, fiber spray guns, Z-shaped spray guns, point guns, and so on.

自动补偿控制系统：具备输出信号控制电磁阀，由电磁阀控制的压缩空气带动枪体的工作来控制胶液的打开及关闭。并输出0-10V 直流电压控制变频器带动马达转动。输出电压与被被测生产线速度成正比。可在线调整胶位、断胶长度及跟踪电压。检测生产线速度的装置有接近开关，旋转编码器等。

Automatic compensation control system: Equipped with output signal control solenoid valve, the compressed air controlled by the solenoid valve drives the operation of the gun body to control the opening and closing of the glue. And output 0-10V DC voltage to control the frequency converter to drive the motor to rotate. The output voltage is proportional to the speed of the tested production line. Can adjust the glue position, broken glue length, and tracking voltage online. Devices for detecting production line speed include proximity switches, rotary encoders, etc.

本文由中空玻璃丁基胶涂布机进行编写，想要了解更多的产品及更详细的精彩内容，请关注我们的网站:http://www.jncsjx.com我们将为您呈现更多的内容。

This article is written by the insulating glass butyl adhesive coating machine. If you want to learn more products and more detailed exciting content, please follow our website: http://www.jncsjx.com We will present more content for you.