中空玻璃生产如果经过多个环节，在哪个环节增加设备才能获得大的效益以及小的投入呢？
If there are many links in the production of hollow glass, in which link can the equipment be added to the maximum benefit and the minimum input?
中空玻璃的整个生产过程大概需要经过玻璃表面的清洗、烘干、铝条的安装以及双组份的密封这么几个步骤。
The whole process of insulating glass may require cleaning, drying, installation of aluminum strip and sealing the two components through the glass surface.
整个生产过程中又以双组份的密封这一步为关键且耗时多，所以小编认为如果我们资金有限的话可以重点对中空玻璃密封这一步增加设备投入购买一台双组份打胶机。
In the whole production process, the two-component seal is the most critical and the most time consuming. Therefore, Xiaobian believes that if our funds are limited, we can focus on the step of sealing the hollow glass and increase the investment of the equipment to buy a two component glue machine.
双组份密封常用胶水有：硅酮胶、玻璃胶、硅胶等，常规的灌胶机都是把胶水倒进两个料缸，再通过定量泵配比、混合、定量供胶到产品，而由于双组份所用胶水粘度都非常高要把这些胶水倒入料缸非常困难.

Two-component sealing glue is used: silicone rubber, silicone rubber, glass, glue pouring machine routine is the glue into the two cylinder, and then to the product through quantitative pump mixing, quantitative glue, and because the two components of the glue viscosity is very high to put the glue into the cylinder is very difficult.
所以双组份打胶机区别于常规灌胶机的是：双组份打胶机都是根据客户所用胶桶规格，量身订制压盘，打胶时通过压盘压胶，压盘上配有活塞泵或齿轮泵抽胶，客户只需把胶桶放到压盘机定位块上即可。
So the two-component glue machine is different from the conventional glue machine is a two-component glue machine is used in plastic barrel according to the specifications of customers, tailored to the pressure plate, glue plate by adhesive, pressure plate is equipped with a piston pump or gear pump rubber, customers only need to glue the bucket positioning the pressure plate can block machine.
双组份打胶机原理跟双液点胶机一样，根据客户AB胶桶量身订制两个压盘，把胶桶放入压盘下，通过压盘压胶再通过定量泵配比、混合、定量打到产品上。
Two-component glue machine principle with double liquid dispensing machine, according to customer tailored two AB glue barrel pressure plate, the glue bucket into the pressure plate, the pressure plate pressure glue through quantitative pump mixing, quantitative hit products.
目前市面的双组份打胶机大多数为活塞式打胶，由于活塞式有一个抽胶的过程，经常会导致打胶的线条忽大忽小，所以成林数控的双组份打胶机都是以可连续性供胶的精密齿轮泵抽胶，这样可保证打胶线条均匀，不会有忽大忽小的情况出现。
At present, the market of the two-component glue machine for the majority of piston glue, the piston has a pumping process, often causes the lines flickering glue small, so the forest NC two-component glue machine is a precision gear pump can be continuous pumping glue glue this may ensure the glue line uniform, there would be no flickering.
卧式双组份打胶机，完全掌握设备的核心技术遇到任何细小的问题都可以得到完美的解决主要的是该设备投入小、占用厂房空间不大。
Horizontal double component sealing machine, the glue machine is the first CNC forest and apply for a number of international patents, fully grasp the core technology and equipment to meet any small problems can be solved most of the equipment is small investment, little space occupied workshop.
以上便是双组份打胶机今天的分享，您还满意吗，欢迎关注我们的网站:http://linshi.jncsjx.com并且关注我们的产品，我们将为您提供优良的产品，衷心的愿与您建立合作关系。
The above is a two component glue machine today's sharing. Are you satisfied? Welcome to our website: http://linshi.jncsjx.com and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.