活塞室中填满胶可进行手工调节

时间:2018-02-18 来源:http://www.jncsjx.com/ 发布人:昌盛机械

双组份打胶机是从人工到自动化的一个重大转变,在打胶机的使用过程中,要注意不要用手去触摸该设备上的任何部位,不要去触摸控制箱内电路板上的元件,尤其禁止带电插拨,情节严重则会导致人身触电和损坏设备。
A two-component glue machine is a major shift from manual to automatic, in the process of using glue machine, should pay attention to use the hand to touch any part of the equipment not, don't touch the control box on the circuit board components, especially the prohibition of live plug serious, it will lead to people electric shock and damage of equipment.
1、工作原理:压缩空气送入胶瓶(注射器),将胶压进与活塞室相连的进给管中,当活塞处于上冲程时,活塞室中填满胶,当活塞向下推进滴胶针头时,胶从针嘴压出。滴出的胶量由活塞下冲的距离决定,可以手工调节,也可以在软件中控制。
1, the working principle of compressed air into the plastic bottle (injector), the rubber pressure into the piston chamber is connected with the feed tube, when the piston is in the up stroke, the piston chamber filled with glue, glue when the piston pushes down the needle, needle from the mouth out of glue. Glue drop out is determined by the distance of the piston down, can be manually adjusted, can also control the software.

双组份打胶机
2、特点:高速度、对胶剂粘度的低灵敏度。
2. Characteristics: high speed, low sensitivity to viscosity of glue.
3、优势:可提高点胶速度,改善点胶环境,提高点胶质量。通过利用气压和以微处理器为基础的定时装置来调节涂敷到部件上的流体量,替代了操作员的人为猜测。
3, advantages: can improve the speed of glue, improve the glue environment and improve the quality of the glue. By using the pressure and microprocessor based timing devices to regulate the amount of fluid applied to the components, the artificial guess is replaced by the operator.
在次使用新买的打胶机设备时,要注意检查设备是否完好无损、有无松动脱落现象。因为打胶机在运输过程中很可能因受到各种震动而使得机器设备上的各连接处有松动或者脱落,这就需要在检查完确认没问题过后才能投入使用。如果出现问题,应及时给予解决方可投入使用。
In the first use of new buy rubber machine equipment, pay attention to check whether the equipment is intact, there is no loosening and falling off. Because the rubber machine is likely to be loosened or dropped due to all kinds of vibration during the transportation process, so it is necessary to put into use after checking the confirmation. If there is a problem, the solution should be put into use in time.
操作人员应经常检查打胶机设备上的气管、胶管,防止这些管子老化破裂、漏气,避免这些问题可以增加安全。
The operators should regularly check the trachea and hose on the rubber machine equipment to prevent these pipes from aging and cracking and air leakage, so as to avoid these problems to increase safety.
本文的精彩内容来自双组份打胶机详细内容请点击我们的官方网站:http://linshi.jncsjx.com谢谢您的到来!
The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://linshi.jncsjx.com thank you for your arrival!

联系我们Contact us

  • 咨询热线:0531-85717458 13705446998
  • 公司地址: 山东省德州市齐河安头乡企巢工业园
  • 扫码联系我们:

截屏,微信识别二维码

微信号:13705446998

//