中空玻璃设备的保养总体方法不难，关键是要做好对设备滑轮的保养润滑，保证工作时候的电压稳定，预防电机出现烧毁的情况，确保设备能够正常运行就可以了。
　　The overall maintenance method of the insulating glass equipment is not difficult. The key is to do well the maintenance lubrication of the equipment pulley, ensure the voltage stability at work time, prevent the motor from burning down, and ensure that the device can run normally.
　　万一设备在工作期间发生了重大的故障，那么就需要聘请的维修人员前来处理。非人员切莫擅自拆机维修。
　　In case of a major failure during the operation of the equipment, the professional maintenance personnel need to be hired to deal with it. Non professionals do not disassemble or repair.

　　中空玻璃设备的关键零件传送辊必须要注意定期进行润滑处理，在设备运转之前要先检查器润滑情况，看油位线标是否正常，油位必须要保持在滑标的中心线以上才可以。
　　The key parts of insulating glass equipment must be careful to lubricate regularly. Before the operation of the equipment, check the lubricants first, see whether the oil level mark is normal, and the oil level must be kept above the centerline of the slide mark.
　　设备内的水箱要保证系统水循环的正常，每周要对水箱进行一次彻底的清洗，要对喷水嘴进行常规性的检查，一旦发现有堵塞就要马上进行疏通清理。此外还有风路的维护，设备风机的运行情况要保持良好稳定。
　　The water tank in the equipment should ensure the normal water circulation of the system. Once a week, the tank must be thoroughly cleaned. The nozzle should be checked routinely. Once there is a blockage, it is necessary to dredge and clean up immediately. In addition to the maintenance of the wind road, the operation of the equipment fan should be kept good and stable.
　　本文由双组份打胶机为您提供，我们的网站是:http://linshi.jncsjx.com我们将以全心全意的热情为您提供更优质的服务，欢迎您的访问！
　　This article is provided by two component glue machine. Our website is: http://linshi.jncsjx.com, we will provide you with better service with wholehearted enthusiasm, welcome your visit.