高效气动双组份打胶机的打胶

时间:2018-02-27 来源:http://www.jncsjx.com/ 发布人:昌盛机械

  高效气动双组份打胶机是集技术生产的中空玻璃密封胶打胶机.
  High efficiency pneumatic double component glue machine is the best technology produced at home and abroad hollow glass sealant glue machine.
  A组分泵和B组分泵胶分别采用气动系统驱动,采用无触点电器控制系统控制,换向灵敏可靠,其独特的方便可调试配比机构,大限度地保证双组份胶近乎苛刻的配比要求,出胶连续均匀,涂胶效果好,生产高。
  A components and B components of pump pump respectively using pneumatic drive system, electric control system adopts contactless commutation control, sensitive and reliable, its unique convenient adjustable proportioning mechanism to ensure maximum two-component adhesive demanding ratio, glue uniform, good gluing effect, high production efficiency.
  1)操作手动转阀,将A泵提升至高气动双组份打胶机,提升过程中观察各管路有无拉伸过紧处。
  1) operate the manual transfer valve to lift the A pump to the maximum pneumatic double component glue machine. In the process of lifting, there is no tension in the pipe.

双组份打胶机
  2)将胶桶放置在A泵压胶盘下双组份打胶机,开启胶桶双组份打胶机配件,将其中塑料袋外翻至桶外,胶面塑料片取出。
  2) place the plastic bucket in the two component rubber beating machine under the A pump pressure glue disc, open the plastic bucket double component glue machine accessories, turn the plastic bag to the outside of the barrel, and remove the plastic surface piece.
  3)使A泵压盘缓慢下降,压盘入桶时应使其与桶口对准,将压胶盘排气口打开双组份打胶机多少钱,直到压盘接触胶面。待压盘内气体全部排放完并有少量胶从排气口溢出时,即可关闭排气阀。(提升开关保持下压状态)
  3) make the A pump pressure plate slow down. When the pressure plate is in the barrel, it should be aligned with the barrel mouth, and will open the exhaust port of the rubber disc to the two components glue machine, until the pressure plate contacts the rubber surface. The exhaust valve can be closed when the gas is completely discharged and a small amount of glue is spilled from the exhaust port. (lift switch keep down pressure state)
  4)开机试打胶:将主泵气源开关打开,按下胶枪开关,直至A泵里空气排净枪口处出胶连续时停止。
  4) open machine test glue: open the main pump gas switch, press the glue gun switch until the air in the A pump is discharged at the mouth of the gun and stops when the glue is continuous.
  本文的精彩内容来自双组份打胶机详细内容请点击我们的官方网站:http://linshi.jncsjx.com谢谢您的到来!
  The wonderful content of this article comes from the detailed content of the double component glue machine, please click on our official website: http://linshi.jncsjx.com thank you for your arrival!

联系我们Contact us

  • 咨询热线:0531-85717458 13705446998
  • 公司地址: 山东省德州市齐河安头乡企巢工业园
  • 扫码联系我们:

截屏,微信识别二维码

微信号:13705446998

//