一般情况下出现双组份打胶机打胶不饱满的问题大多数是由于人为原因导致的，当然有设备的原因只是出现的概率相对较低。我们说说人为原因导致的这种情况都有哪些。一种情况是由于我们将打胶机的打胶速度设置的过快导致的。
Under normal circumstances, the problem of incomplete rubber beating is mostly caused by human factors. Of course, the reason is that the probability of occurrence is relatively low. First of all, let's say what the human cause is. One of the cases is that we set the sizing speed of the glue machine too fast.
有的客户为了加快自己的生产节奏追赶生产计划，将打胶速度认为调整的过快，导致胶体还没有完全达到合格标准机头就已经移动到下一个位置进行打胶操作了，如果我们需要加快打胶的速度调整了打胶机的移动参数的话，那么我们对应的也应该对供胶系统也进行相应的设置，比如这时候我们就需要加大供胶压力，增大打胶机的出胶速度来配合对象的移动速度的增加。

Some customers in order to speed up its own rhythm of production after the production plan, the speed adjustment of the glue that is too fast, resulting in the colloid is still not fully meet the eligibility criteria of head has been moved to the next position of the glue operation, if the mobile parameter we need to accelerate the speed of adjustment of the glue glue machine. So, we should also carry out corresponding setting on the glue supply system, for example, this time we need to increase the glue supply pressure, increase the speed of glue machine glue to match the object's speed increase.
如果我们仅仅是单独的增加了打胶机的移动速度而没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。另外一种情况跟打胶机的速度差不多就是我们的供胶压力不足导致的。产生打胶不饱满的原因可以参考种情况。除了以上小编说的人为原因导致的这个故障以外设备的零部件损坏也会导致这个问题，比如机头感应器损坏。
If we increase the speed of the glue machine alone instead of adjusting the pressure, it is very likely that we will not get enough glue. The other is about the speed of the rubber machine, which is caused by our lack of adhesive pressure. The reason why the glue is not full can be referred to the first situation. Damage to the parts of the equipment, such as the head inductor damage, can also be caused by the damage to the parts of the equipment other than the man-made causes mentioned above.
在我们的打胶机机头有一个对铝条深浅进行探测的感应器，如果发现铝条过深或者过浅的时候他会自动的调整移动的移动速度以及供胶压力（自动调整幅度是小范围内的）。如果我们的铝条本身就深浅不一，在加上我们的感情器损坏的坏就会发生这种情况！
At the head of our glue machine, there is an inductor to detect the depth of the aluminum strip. If it is found that the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed and the pressure of glue supply (the automatic adjustment range is within a small range). If our aluminum strip itself the depth of our emotional damage in addition to the bad happen!
本文由双组份打胶机友情奉献.更多有关的知识请点击:http://www.jncsjx.com我们将用的技术.真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is a friendship contribution from two component glue making machine. Please click on more related knowledge: http://www.jncsjx.com, we will use the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will dedicate more related knowledge to you. Please look forward to it.