全自动封胶机倒角处理的路径检测
时间:2017-09-26 来源:http://www.jncsjx.com/ 发布人:昌盛机械
全自动封胶机生产能力高的特点广泛用于电源胶并能确保替换自动化程度高、生产能力高的特点,广泛用于电源胶, 电源胶机主要用于:电源、LED电源,防水电源,路灯驱动电源,防水电源,电源适配器。
The characteristics of automatic sealing machine is widely used in high power production capacity of glue and can ensure that the replacement characteristics of high degree of automation, high production capacity, widely used in power supply power machine is mainly used for glue, glue: power supply, LED power supply, water supply, street lamp driver, waterproof power, power source adapter.
1、程序迅速调整:在配药机控制系统,并可以存储超过999工作轨迹图形,简单地选择操作简单,可以快速适应不同的工件,机器系统可以自动订单方向改革,自动重复路径检测、自动倒角处理,平滑处理。
1, the program quickly adjust: in the control system of dispensing machine, and can store more than 999 track graphics, simply select the simple operation, can quickly adapt to different workpiece, the machine can automatically order direction, automatic repeat path detection, automatic chamfering processing, smoothing processing.
2、动态混合搅拌系统:吐出枪部分泄漏防止阀,可有效地防止泄漏;正负1%的准确率。
2, dynamic mixing system: spit gun part of leakage prevention valve, can effectively prevent leakage; plus or minus 1% accuracy.
3、机器很容易调整,可以在一定范围内满足不同高度的需求工件,并能确保替换。
3, the machine is easy to adjust, you can within a certain range to meet different levels of demand for the workpiece, and can ensure replacement.
4、进料桶使用不锈钢:AB增值税的动态混合,材料缸可以加热,外部加热装配,数字显示,温度可调;
4. The feeding barrel is made of stainless steel: AB dynamic mixing of VAT, material cylinder can be heated, external heating assembly, digital display, temperature adjustable;
全自动点胶机胶阀滴漏经常发生于胶阀关毕以后,95%的此种情形是因为使用的针头口径太小所致。
Full automatic dispensing machine glue valve leakage often occurs after the rubber valve closed, 95% of this case is due to the use of needle caliber is too small.
一般利用控制全自动点胶机混合管长度与控制压杆分别来决定胶水混合程度和控制胶水通断。
Generally, the length of the mixing tube and the control pressure bar are respectively determined by the length of the mixing pipe and the control pressure bar, and the glue is switched on and off.
混合管的混合方式为静态混合,由一连串左右旋叶片相互垂直排列在套管内组成,A、B胶水经过混合管时进行连续的切割与重合为均匀的混合液。混合管出口部可接转接头,方便使用任何口径的针头,以保证出胶量精确。
The mixing mode of the mixing tube is a static mixing, and a series of left and right rotating vanes are arranged vertically in the casing, and the A and B glue are continuously cut and overlapped to be a uniform mixing liquid through the mixing tube. The outlet of the mixing pipe can be connected with a switch head, so that the needle with any caliber can be conveniently used, so as to ensure the exact amount of the glue output.
针筒放入针筒夹持器后并固定就可以连接气阀了。将点胶控制器的AIR OUT口通过气管连接到针筒,并把针筒气阀连接到点胶控制器的AIRIN。将点胶机的‘点胶’接口通过电缆线连接到点胶控制器的信号输入接口。
The needle into the needle collet holder can be connected and fixed valve. Connect the AIR OUT port of the dispensing controller through the trachea to the syringe and connect the syringe valve to the AIRIN of the dispensing controller. The "dispensing" interface of the dispenser is connected to the signal input interface of the dispensing controller through the cable.
以上便是双组份打胶机的分享,您还满意吗,欢迎关注我们的网站:http://www.jncsjx.com/并且关注我们的产品,我们将为您提供优良的产品,衷心的愿与您建立合作关系。
The above is a two-component glue machine to share, you still satisfied with it, welcome to our website: http://www.jncsjx.com/ and pay attention to our products, we will provide you with excellent products, sincerely wish to establish business relationship with you.
- 中空玻璃生产线一天能做多少平方 2024/12/23
- 全自动丁基胶涂布机操作规程 2024/12/14
- 丁基胶涂布机在使用的常见问题 2024/12/13
- 双组份打胶机如何调整滴胶量? 2024/12/09
- 中空玻璃生产线的磨损如何解决 2024/12/07
- 双组份打胶机对于打胶工作完成很重要 2024/12/05
- 全自动封胶线的工业自动化设备介绍 2024/12/03
- 玻璃涂布机设备:设备存在的安全隐患 2024/11/25
- 中空玻璃加工设备:玻璃开胶的应急处理措施 2024/11/21
- 中空玻璃生产线:玻璃起雾怎么办?昌盛为您解决! 2024/11/20