中空玻璃胶机分为两部分胶机，单部分胶机，和丁涂胶机，不同胶机的使用不一样，下面给大家解释一下。
　　Hollow glass glue machine is divided into two parts, single part glue machine, and Ding glue machine. Different glue machines are used differently. Let's explain.
　　在未来的中空玻璃,中空玻璃胶的使用机器,因为玻璃后的中空玻璃胶密封或结构完整性的影响,但在日常使用的过程中不得不承认,中空玻璃的确是一个很好的建筑材料,密封和隔音性和外部受力性能的性能很好。
　　In the future, the application machine of insulating glass and insulating glass glue will be affected by the sealing or structural integrity of insulating glass glue behind the glass, but in the process of daily use, we have to admit that insulating glass is indeed a good building material, with good sealing and sound insulation and external stress performance.
　　中空玻璃胶机是一种常用何时使用胶水,但随着使用胶水的选择根据不同的情况下,我们经常看到一个硅橡胶,和玻璃胶、硅胶等,在日常使用中通常使用胶机将胶直接注入汽缸内两种不同的材料,然后使用一定比例后需要通过定量泵匹配、混合和定量后,注入到产品的使用中空玻璃胶机,但由于一般中空玻璃密封胶机胶使用一些非常大的胶水粘度,所以操作要求非常高,这是非常困难的,所以在使用中空玻璃密封胶机操作和一般胶水机是不同的,中空玻璃胶机工作时主要根据客户提供胶水桶操作规范,和定制的压力板等,在通过压力板胶胶,压盘设置活塞泵和齿轮泵,以上这些都是在准备胶客户使用时只需要把塑料桶在压盘机。

　　Hollow glass glue machine is a kind of glue that is often used by professionals. However, with the selection of glue, we often see a silicone rubber, glass glue, silica gel, etc. in daily use, we usually use glue machine to directly inject glue into two different materials in the cylinder. After using a certain proportion, we need to match, mix and quantify through quantitative pump, The hollow glass glue machine is used to inject into the product, but because the general hollow glass sealant machine glue uses some very large glue viscosity, the operation requirements are very high, which is very difficult, so the operation of the hollow glass sealant machine is different from that of the general glue machine. When the hollow glass glue machine works, it is mainly based on the operation specifications of the glue bucket provided by the customer, and the customized pressure plate, etc, Through the pressure plate glue, the pressure plate is equipped with piston pump and gear pump, all of which are only needed to put the plastic barrel in the pressure plate machine when preparing the glue customer for use.
　　中空玻璃胶机使用时一般根据胶水的性能可分为单组分中空玻璃胶机和中空玻璃双组份胶机,单租一胶机,这种胶水机是一种简单的设备,使用的过程相对简单,只需要用一个压盘将某个组件胶取出,然后到产品里面。
　　Hollow glass glue machine can be divided into single component hollow glass glue machine and hollow glass two-component glue machine according to the performance of glue. Single rent one glue machine. This glue machine is a kind of simple equipment. The use process is relatively simple. Only one pressure plate is needed to take out a component glue and then put it into the product.
　　还有一种是一种双组分胶机器,原理我们知道,几乎是双液点胶机,在工作的时候可以根据客户的要求定制,压盘、压盘需要两个,然后把两个自定义胶筒压盘下,准备和后压盘压力胶配比和混合定量泵,所有完成内部胶产品在未来。
　　The other is a two-component glue machine. As we know, it is almost a two-liquid dispensing machine. When it works, it can be customized according to the customer's requirements. The pressure plate and the pressure plate need two. Then, under the two customized rubber cylinder pressure plates, prepare and mix the pressure glue ratio of the rear pressure plate and the quantitative pump for mixing. All finished internal glue products will be in the future.
　　现在市面上的中空玻璃胶机普遍采用的方式更多的活塞在闹情绪的,因为语言是活塞胶有一个的烟橡胶的过程,但也经常因为操作不准确在中空玻璃胶机、胶线变得不均匀,容易出现或大或小,所以在开发和研究后,中空玻璃能够连续胶胶机,精度和操作很多,和胶水线也变得更加均匀,基本上不会在大型和小型的事件,并按照使用时间的比值来匹配的使用情况来匹配,除了手持喷胶枪的操作还需要帮助,你也可以使用手动操作。
　　At present, more and more pistons in the market are in a mood, because the language is that the piston glue has a professional process of smoke rubber, but also often because the operation is not accurate in the hollow glass glue machine, glue line becomes uneven, easy to appear or large or small, so after the development and research, the hollow glass can continuously glue machine, with a lot of precision and operation, And glue water line also becomes more even, which will not be matched in large and small events, and according to the ratio of use time to match the use situation. Besides the operation of hand-held glue gun, you can also use manual operation.
　　以上就是双组份打胶机对中空玻璃胶机胶水的使用特点的详细介绍，想要了解更多请点击官网http://linshi.jncsjx.com
　　The above is a detailed introduction of the use characteristics of the two-component glue applicator for the hollow glass glue applicator. To learn more, please click http://linshi.jncsjx.com