1.更换胶种时，清洁管路。此时，关闭进料阀，打开排放阀，排出胶桶中剩余的胶料，关闭排放阀，打开进料阀，将清洗溶剂倒入储液桶中，按常规操作方法将溶剂压出清洗。
1. Clean the pipeline when replacing the rubber seed. At this time, close the feed valve, open the discharge valve to discharge the remaining rubber in the rubber barrel, close the discharge valve, open the feed valve, pour the cleaning solvent into the liquid storage barrel, and press out the solvent for cleaning according to the conventional operation method.
2.如果进气异常，发现水汽，请清除调压过滤器中的水汽，或检查气源是否异常。在胶机大量使用前，请先小试，掌握产品使用技巧，以免出错，试验无问题时，再用双液滴胶机或双液胶机批量生产；真空系统，真空消泡处理胶，为了排除混匀过程中产生的气泡，或在使用前站立10-20分钟，以便使气泡及时搅拌时产生，混合在一起的胶水量。
2. If the intake air is abnormal and water vapor is found, please clear the water vapor in the pressure regulating filter or check whether the air source is abnormal. Before the glue machine is widely used, please have a small test first to master the product use skills to avoid mistakes. If there is no problem in the test, then use the double liquid glue dropping machine or double liquid glue machine for mass production; Vacuum system, vacuum defoaming treatment glue, in order to eliminate bubbles generated in the mixing process, or stand for 10-20 minutes before use, so as to generate bubbles when mixing in time, and the amount of glue mixed together.
3.定期清洁机器部件，提高使用寿命。胶的混合量越多，反应越快，固化速度越快，因此有必要根据实际生产情况合理配胶，否则会造成胶料浪费。杜绝事故，提高生产效率。目前，液体控制技术和点胶设备在现代工业的各个生产领域得到了广泛的应用。

3. Clean machine parts regularly to improve service life. The more the glue is mixed, the faster the reaction and the faster the curing speed. Therefore, it is necessary to mix the glue reasonably according to the actual production situation, otherwise it will cause a waste of glue. Eliminate accidents and improve production efficiency. At present, liquid control technology and dispensing equipment have been widely used in various production fields of modern industry.
4、机器长期停用时拔掉电源，不仅延长了机器寿命，而且节省了大量电。随着工业发展的不断变化，液体控制技术和配料设备也不断向超高精度控制、多样化和化方向发展。
4. Unplug the power supply when the machine is out of service for a long time, which not only prolongs the service life of the machine, but also saves a lot of electricity. With the continuous change of industrial development, liquid control technology and batching equipment are also developing towards ultra-high precision control, diversification and specialization.
注意：每次使用后，要做好清洁工作，再擦一下可以看到的地方，用酒精擦拭，点油或黄油在定期锻炼的部位，保持润滑，如果长时间不用需要打磨光胶水，否则在分配器内固化，需要花钱清理。
Note: after each use, do a good job of cleaning, wipe the visible place, wipe it with alcohol, point oil or butter, and keep it lubricated at the part where you exercise regularly. If you don't need to polish the glue for a long time, otherwise it will solidify in the distributor and need to spend money to clean it.
以上的精彩内容均来自：双组份打胶机批发，更多的精彩内容请点击进入我们的网站：http://linshi.jncsjx.com进行交流学习，我们后续会不断的为您提供分享，敬请期待！
The above wonderful content comes from the wholesale of two-component gluing machine. For more wonderful content, please click to enter our website: http://linshi.jncsjx.com For exchange and learning, we will continue to share with you in the future. Please look forward to it!