单组份打胶机比较简单，只需一个压盘把胶水抽出定量打到产品即可。
The single component glue applicator is relatively simple. It only needs a pressure plate to draw out the glue and beat it quantitatively to the product.
双组份打胶机：原理跟双液点胶机一样，根据客户AB胶桶量身订制两个压盘，把胶桶放入压盘下，通过压盘压胶再通过定量泵配比、混合、定量打到产品上。目前市面的中空玻璃打胶机大多数为活塞式打胶，由于活塞式有一个抽胶的过程，经常会导致打胶的线条忽大忽小，所以我司的中空玻璃打胶机都是以可连续性供胶的精密齿轮泵抽胶，这样可保证打胶线条均匀，不会有忽大忽小的情况出现。
Two component glue applicator: the principle is the same as that of double liquid dispensing machine. Two pressure plates are customized according to the customer's AB glue barrel. Put the glue barrel under the pressure plate, press the glue through the pressure plate, and then mix, and quantitatively hit the product through the quantitative pump. At present, most of the insulating glass gluing machines on the market are piston gluing. Because the piston type has a gluing process, the gluing lines are often large and small. Therefore, our insulating glass gluing machines are pumped with precision gear pumps that can continuously supply glue, so as to ensure that the gluing lines are uniform and there will be no large and small situations.
中空玻璃打胶机根据自动化程度可分为：半自动打胶机及全自动打胶机。
Insulating glass gluing machine can be divided into semi-automatic gluing machine and full-automatic gluing machine according to the degree of automation.
半自动中空玻璃打胶机：半自动打胶机只是把胶水配比、混合、定量打胶的设备，再配备手持式打胶枪，由于中空玻璃规格都较大，需人手移动打胶枪把胶水打到中空玻璃上。
Semi automatic gluing machine for insulating glass: the semi-automatic gluing machine is only a device for proportioning, mixing and quantitative gluing of glue, and is equipped with a hand-held glue gun. Since the specifications of insulating glass are large, it is necessary to manually move the glue gun to hit the glue on the insulating glass.
全自动中空玻璃打胶机：全自动中空玻璃打胶机配备三轴机械手，三轴机械手跟打胶机统一通讯，相互配合，打胶机把胶水配比、混合后定量供到三轴机械手，三轴机械手可实现半圆、圆形、半圆弧、四方形、三角形等各种不规则形状打胶作业。行程根据客户玻璃尺寸定制。
Full automatic insulating glass gluing machine: the full-automatic insulating glass gluing machine is equipped with a three-axis manipulator. The three-axis manipulator communicates with the gluing machine uniformly and cooperates with each other. The gluing machine quantitatively supplies the glue to the three-axis manipulator after proportioning and mixing. The three-axis manipulator can realize various irregular gluing operations such as semicircle, circle, semi-circular arc, square and triangle. The itinerary is customized according to the customer's glass size.

中空玻璃打胶机特点：
Features of insulating glass gluing machine:
1.配比、定量准确不会出现打胶线条忽大忽小的情况
1. The proportioning and quantification are accurate, and the gluing lines will not be large or small
2.通过进口高精度齿轮泵抽胶，稳定性高使用寿命长。
2. The rubber is pumped by imported high-precision gear pump, which has high stability and long service life.
3.加装限位报警功能，压盘压到桶底后，设备发出声光报警提示工作人员更换胶桶。
3. Install the limit alarm function. After the pressure plate is pressed to the bottom of the barrel, the equipment sends an audible and visual alarm to prompt the staff to replace the rubber barrel.
4.出胶大小可根据实际情况自由调节。
4. The size of glue can be adjusted freely according to the actual situation.
三轴机部分特点：
Some features of three-axis machine:
1.使用工控电脑配合进口伺服电机，运行稳定，。
1. The industrial computer is used to cooperate with the imported servo motor to ensure stable operation,.
2.教导式编程，编程方便快捷。
2. Instructional programming, convenient and fast programming.
3.存储容量：2500点以上编程点。
3. Storage capacity: more than 2500 programming points.
4.可选配滚珠平台或流水线作业功能，使生产效率更高效。
4. Ball platform or assembly line operation function can be selected to make production efficiency more efficient.
适用胶水：硅酮胶、高粘度硅胶、玻璃胶等高粘度胶水流体控制作业。
Applicable glue: silicone glue, high viscosity silica gel, glass glue and other high viscosity glue fluid control operations.
今天小编给大家呈现就是关于 双组份打胶机的相关知识，如果您对于本文有什么疑问及问题欢迎来电咨询或者网站下边留言：http://linshi.jncsjx.com
Today, Xiaobian presents you the relevant knowledge about two-component gluing machine. If you have any questions and questions about this article, please call us or leave a message at the bottom of the website: http://linshi.jncsjx.com