中空玻璃打胶机是中空玻璃生产过程当中不可缺少的一种设备，而在使用中空玻璃打胶机之前也需要对中空玻璃铝条打胶机进行调试，下面我们就来向您介绍中空玻璃铝条打胶机的调试方法，让您可以更加方便的使用这种机械设备。
Insulating glass gluing machine is an indispensable equipment in the production process of insulating glass, and the insulating glass aluminum strip gluing machine also needs to be debugged before using the insulating glass gluing machine. Next, we will introduce you to the debugging method of insulating glass aluminum strip gluing machine, so that you can use this mechanical equipment more conveniently.
打开中空玻璃打胶机的气泵开关,电源总开关,控制台开关,在控制台按手动按钮,然后在显示屏上找到原点设定,点击辅助原点设定,然后点击头部原点设定,注意原点设定时避免头部和辅助吸盘碰撞.设定好之后返回设定玻璃厚度,输入完以后,点击设置进入.等命令位置和当前位置数值一致即可。
Turn on the air pump switch, main power switch and console switch of the insulating glass gluing machine, press the manual button on the console, then find the origin setting on the display screen, click the auxiliary origin setting, and then click the head origin setting. Pay attention to avoid the collision between the head and the auxiliary suction cup when setting the origin After setting, return to the setting glass thickness. After inputting, click setting to enter Wait until the command position is consistent with the current position value.

打开一桶胶按钮,按工作选择拍胶启动,在按伐开.此时胶头已经出胶,等看不见白胶,以混均匀以后按伐关,在按链接生产线,此时可以自动打胶.开始打胶要看每条边每个角打胶是否均匀。
Open a bucket of glue button, press the work selection to start glue shooting, and then press open At this time, the glue head has been out of glue. When the white glue cannot be seen, press the cutting off button after mixing evenly, and then press the link production line. At this time, the glue can be applied automatically When you start gluing, it depends on whether the gluing is uniform on each side and corner.
如果需要调整打胶机的压力,可以在屏幕上点击返回找到密封配方,会显示当前密封压力,如果每条边都缺胶,那么可增加压力,压力大胶量大,压力小胶量就小.如果发现某条边胶量不够时,在密封配方中会显示有向上密封,上部密封,向下密封,和下部密封,开始打胶的那条边就是向上密封,然后顺序从上。
If you need to adjust the pressure of the glue applicator, you can click back on the screen to find the sealing formula, and the current sealing pressure will be displayed. If there is a lack of glue on each side, you can increase the pressure. If the pressure is large, the glue quantity is large, and the pressure is small, the glue quantity is small If it is found that the amount of glue on a certain edge is insufficient, the sealing formula will display upward sealing, upper sealing, downward sealing and lower sealing. The edge at the beginning of gluing is upward sealing, and then from top to bottom.
如果发下只有某条边胶少或胶多时,调整扫描胶量细微调整,数值大胶量就大,数值小胶量就小.然后说下到末端伐关的距离,数值大,胶嘴到末端胶量少,数值小胶量大
If there is only a certain edge with less or more glue, adjust the scanning glue amount and adjust it slightly. If the value is large, the glue amount will be large, and if the value is small, the glue amount will be small Then say the distance from the bottom to the end, the value is large, the glue amount from the glue nozzle to the end is small, the value is small, and the glue amount is large
以上就是为大家介绍的有关双组份打胶机的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://linshi.jncsjx.com
The above is a detailed introduction to the two-component gluing machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://linshi.jncsjx.com