After adjusting the angle, the cutting length of the aluminum alloy profile should also be adjusted. Pull the handle to move the right saw head along the circular guide rail to the exact position (see ruler pointer), and the length indicated by the ruler is the short edge length of the aluminum alloy profile. After cutting, if there is a deviation between the cutting contour length and the required length, fine adjustments should be made. When fine-tuning, tighten the brake adjustable hand and turn the fine-tuning hand to the required size Firstly, everyone should familiarize themselves with the functions of each button on the panel.

(2)调整好工件的角度和长度后，按下“锯开始”按钮。锯头电机运转平稳后，安装型材，同时按下“夹紧”和“锯停”按钮。如遇特殊情况，按下紧急停止按钮。如果将“锯头选择”开关设置为“左”或“右”位置，则左右锯头可独立工作。如果开关设置为“双”位，左右锯头可同时工作。下班后，关闭主电源。

(2) After adjusting the angle and length of the workpiece, press the "Saw Start" button. After the saw head motor runs smoothly, install the profile and press the "clamp" and "saw stop" buttons at the same time. In case of special circumstances, press the emergency stop button. If the "Saw Head Selection" switch is set to the "Left" or "Right" position, the left and right saw heads can work independently. If the switch is set to the "dual" position, the left and right saw heads can work simultaneously. After work, turn off the main power supply.

有了中空玻璃生产线上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：http://www.jncsjx.com或者来电咨询

With the summary on the production line of multiple insulated glass, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://www.jncsjx.com Or call for consultation