The insulating glass production line includes cleaning and lamination, which can be further divided into the following contents

中空玻璃生产线主要有四段:入料段、清洗干燥段、检查段和合片段.四段均以相同的倾角立式安放,结构紧凑、经济实用、效率高、维护方便.清洗箱为不锈钢材料制造,传送辊为耐酸碱橡胶辊;通过农业生产体系玻璃视窗可随时方便地观察玻璃清洗情况;入料段、清洗干燥段采用手动无级调速电机传动,玻璃以合适的速度平稳地运行.干燥段采用大风力倾斜风刀能使玻璃表面得以干燥.检查段设有灯管,能清晰地检查玻璃的清洗质量;合片段具有玻璃定位及铝框定位装置,能完成玻璃定位、铝框定位安放功能.玻璃由传送胶辊承托及传送,传送辊由电机(辊压段电机)经过变频调速器通过链轮带动,玻璃由清洗干燥段低速进入本段,经检查合格后加速运行至下一工作段,提高工作效率;由变频调速器控制本段调速电机的运行速度,光电开关控制玻璃进入下一工作段.

The insulating glass production line mainly consists of four sections: feeding section, cleaning and drying section, inspection section, and assembly section. All four sections are vertically arranged at the same inclination angle, with a compact structure, economy and practicality, high efficiency, and easy maintenance. The cleaning box is made of stainless steel material, and the conveying roller is acid and alkali resistant rubber roller; The glass cleaning situation can be easily observed through the agricultural production system glass window at any time; The feeding section and the cleaning and drying section are driven by manual stepless speed control motors, and the glass runs smoothly at an appropriate speed. The drying section uses a strong wind inclined blade to dry the glass surface. The inspection section is equipped with a lamp tube, which can clearly check the cleaning quality of the glass; The composite segment has glass positioning and aluminum frame positioning devices, which can complete the functions of glass positioning and aluminum frame positioning. The glass is supported and transported by conveyor rollers, which are driven by a motor (roller pressing section motor) through a frequency converter and a sprocket. The glass enters this section at low speed from the cleaning and drying section, and after passing the inspection, accelerates to the next working section, improving work efficiency; The frequency converter controls the running speed of the speed regulating motor in this section, and the photoelectric switch controls the glass to enter the next working section

中空玻璃生产线的清洗水路系统为循环系统,其水箱配有恒温水加热装置,水温可自动保持在合理的范围.

The cleaning water system of the insulating glass production line is a circulating system, and its water tank is equipped with a constant temperature water heating device, which can automatically maintain the water temperature within a reasonable range

水由水泵从水箱抽出,经喷淋水管喷到玻璃表面上,清洗玻璃后流回水箱,循环使用.若水质较差,需配备水处理装置(用户自备),水经处理后进入水箱,按上述步骤循环使用.

Water is pumped out of the water tank by a water pump and sprayed onto the glass surface through a spray pipe. After cleaning the glass, it flows back to the water tank for recycling. If the water quality is poor, a water treatment device (provided by the user) is required. After treatment, the water enters the water tank and is recycled according to the above steps

风路系统:由风机通过一对倾斜风刀,吹干玻璃.

Air duct system: The glass is blown dry by a fan through a pair of inclined blades

总而言之,中空玻璃生产线主要分为四段,每段分工明确,搭配合理.

In summary, the insulating glass production line is mainly divided into four sections, each with a clear division of labor and reasonable allocation

本文由中空玻璃生产线友情奉献.更多有关的知识请点击: http://www.jncsjx.com 真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from the insulating glass production line. For more relevant knowledge, please click on: http://www.jncsjx.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned