。GT03双组分上胶机，其关键部件均为美国知名公司GRACO原装部件。
　　。 The key parts of gt03 two-component gluing machine are all original parts of Graco, a famous American company.
　　以关键机构元件为补充，采用高强度不锈钢经热处理工艺制成，使双组份胶黏机可靠
　　It is made of high-strength stainless steel by heat treatment process with key mechanism elements as supplement, which makes the two-component adhesive reliable
　　大大提高了设备的使用效率，保证了设备的优良品质。
　　It greatly improves the efficiency of the equipment and ensures the excellent quality of the equipment.
　　2. 固化剂液压系统设有两个过滤装置，提高两组分的混合均匀性和固化性能
　　2. The curing agent hydraulic system is equipped with two filtering devices to improve the mixing uniformity and curing performance of the two components
　　该系统还配有管道高压保护装置，使操作和使用更加方便。系统是完全封闭的系统，消去
　　The system is also equipped with pipeline high-pressure protection device, which makes the operation and use more convenient. The system is completely closed. Eliminate it
　　混合空气时，避免固化剂与空气接触而固化，保证了介质流动的稳定性。
　　When mixing air, avoid the contact between curing agent and air to solidify, and ensure the stability of medium flow.
　　3.基材泵、固化剂泵、比例泵的高压阀口均采用特殊合金研磨而成，零泄漏，独特配置
　　3. The high-pressure valve ports of base material pump, curing agent pump and proportion pump are made of special alloy by grinding, with zero leakage and unique configuration
　　特殊可调配比机构，辅以两组分的比例检测系统，保证两组分的胶水几乎是粗糙的
　　Special adjustable proportioning mechanism and two-component proportioning detection system ensure that the two-component glue is almost rough
　　满足中空玻璃在玻璃幕墙中的比例要求。

　　Meet the proportion requirements of insulating glass in glass curtain wall.
　　4. 本机混合系统采用国际流行的静态往复带式混合机，采用进口混合芯棒，结构独特
　　4. The mixing system of this machine adopts the international popular static reciprocating belt mixer, and adopts the imported mixing mandrel, with unique structure
　　针阀使搅拌更加均匀;特殊弹性材料的挤出喷嘴使中空玻璃的生产更加方便、简单。
　　The needle valve makes the mixing more uniform; the extrusion nozzle of special elastic material makes the production of hollow glass more convenient and simple.
　　美丽。采用进口挤压枪，操作简单，密封可靠。
　　Beautiful. Using imported extrusion gun, easy operation, reliable sealing.
　　5.GT03双组分涂胶机主要由基泵、固化剂泵、比例泵、基泵提升系统、比例调节结构、
　　5. Gt03 two-component glue applicator mainly consists of base pump, curing agent pump, proportion pump, base pump lifting system, proportion adjustment structure
　　比例检测系统、混合系统、气动控制系统。
　　Proportional detection system, hybrid system, pneumatic control system.
　　6. 基础泵、固化剂泵、比例泵均采用专用高压柱塞泵，双向提供等量物料，外加加压进料压力
　　6. Special high-pressure plunger pump is used for foundation pump, curing agent pump and proportion pump to provide equal amount of materials in two directions, plus pressurized feed pressure
　　充分保证了锅内液体的高粘度输送。基材被压入并增加到高压。固化剂被吸入并送入比例泵
　　The high viscosity transportation of the liquid in the pot is fully guaranteed. The substrate is pressed in and increased to high pressure. The curing agent is inhaled and sent to the proportional pump
　　增压。固化剂的流量由调节机构调节。然后，它被送入混合器和混合之前到达挤压枪。
　　pressure boost. The flow of curing agent is regulated by the regulating mechanism. Then it is fed into the mixer and mixed before reaching the extrusion gun.
　　注意:每个设备只允许使用一种密封胶。要更换密封剂类型，必须对整个设备进行清洗
　　Note: only one sealant is allowed for each equipment. To change the sealant type, the entire equipment must be cleaned
　　部分管道和泵体在里面，但这样会影响设备的密封效果，所以不建议使用
　　Some pipes and pump bodies are inside, but this will affect the sealing effect of the equipment, so it is not recommended to use
　　以上就是对双组份打胶机特点的详细介绍，想要了解更多请点击官网http://www.jncsjx.com
　　The above is a detailed introduction to the features of the two-component dispenser. For more information, please click http://www.jncsjx.com