回吸式点胶机在太阳能边框点胶会使用到以下的配件：高压点胶阀、点胶控制器、气压控制装置和针头，这些都是能直接影响到胶量调节的因素，可根据需要调节胶量大小而控制每个配件，例如：点胶针头规格是有非常多种，如果第一次使用的针头规格过大，可针对太阳能边框点胶宽度选择规格，直接把胶量调节到相差不多的宽度，然后利用点胶控制器再做精密调节，这就是桌面式自动点胶机胶量调节的方法。
The following accessories will be used in the solar frame dispensing of the return suction dispenser: high pressure dispensing valve, dispensing controller, air pressure control device and needle, which are all factors that can directly affect the adjustment of glue amount. Each accessory can be controlled by adjusting the glue amount according to the needs. For example, there are many specifications of dispensing needle. If the specification of needle used for the first time is too large, The specification can be selected according to the dispensing width of the solar frame, the glue amount can be directly adjusted to the same width, and then the precise adjustment can be made by using the dispensing controller. This is the method of adjusting the glue amount of the desktop automatic dispensing machine.
还有针对自动点胶机类型的特点，会有一些其它的胶量调节方式，比如回吸式点胶机，如果采用回吸式点胶阀，在停止点胶之后，会有一个回吸胶水动作，这也是胶量调节方式，能保持胶水不会出现漏滴，针对粘度低的胶水，会有比较好的涂胶效果喔！
In addition, according to the characteristics of the type of automatic dispensing machine, there will be some other glue quantity adjustment methods, such as the back suction dispensing machine. If the back suction dispensing valve is adopted, there will be a back suction glue action after stopping dispensing. This is also the glue quantity adjustment method, which can keep the glue from leaking. For the glue with low viscosity, it will have a better gluing effect!

其次，胶水是通过机器来实现自动混合，用于生产量比较大的产品点胶，由于AB料桶是分开的，是通过泵将胶水抽到混合管中，所以不用担心胶水在桶中发生固化。双液点胶机液体流量的控制：通过齿轮泵，主要适用于不含有填料的胶水（填料，即为了增强胶水的导热性，将胶水里面填加如氧化铝，石英砂，陶瓷等具有很强硬度的颗料状物质）。在出胶控制方面采用了更加复杂的工艺形式，自动化智能化的操作模式，为点胶提供了很大的方便。
Secondly, glue is automatically mixed by machine and used for dispensing products with large production. Since AB material barrels are separated and glue is pumped into the mixing pipe by pump, there is no need to worry about the solidification of glue in the barrel. Control of liquid flow of double liquid dispensing machine: through gear pump, it is mainly applicable to glue without filler (filler, that is, in order to enhance the thermal conductivity of glue, fill the glue with granular materials with strong hardness such as alumina, quartz sand and ceramics). In terms of dispensing control, more complex process forms and automatic and intelligent operation mode are adopted, which provides great convenience for dispensing.
胶量调节需要针对自动点胶机类型，再采用相应的方式，跟回吸式点胶机是一样的道理，根据实际机器例子，做胶量的调节，而不是盲目性的，如果您有什么不懂，可以咨询我们中制制作的点胶机厂家，能给您一个准确的回复喔！
The glue quantity adjustment needs to be based on the type of automatic dispensing machine, and then adopt the corresponding method. It is the same as the suction dispensing machine. According to the actual machine example, adjust the glue quantity, not blindly. If you don't understand anything, you can consult our Chinese made dispensing machine manufacturer, and can give you an accurate reply!
以上的精彩内容来自：双组份打胶机更多的精彩内容来自：http://www.jncsjx.com欢迎大家与我们进行交流。
The above highlights come from: two-component glue applicator, and more highlights come from: http://www.jncsjx.com Welcome to communicate with us.