打胶后混合后存在颗粒的问题如何处理?

时间:2022-02-26 来源:http://www.jncsjx.com/ 发布人:昌盛机械

在施胶过程中,中间的中断时间相对较长,或多次积累,并且在施胶结束时清洗不干净,特别是在夏季温度较高时,胶会迅速固化。至于中断应该持续多长时间,建议根据胶水断裂前一天的温度和湿度测量胶水开始之前的温度,因此实际值会有所不同。另外,客户经常需要胶水固化得更快,中断时间越长,很可能会造成颗粒。
In the process of sizing, the interruption time in the middle is relatively long, or accumulated for many times, and the cleaning is not clean at the end of sizing, especially when the temperature is high in summer, the sizing will solidify rapidly. As for how long the interruption should last, it is recommended to measure the temperature before the glue starts according to the temperature and humidity of the day before the glue breaks, so the actual value will be different. In addition, customers often need glue to solidify faster, and the longer the interruption time, it is likely to cause particles.
A/B组分的气压不足,导致混合不均匀,胶水缓慢,容易产生颗粒;
The air pressure of component A / B is insufficient, resulting in uneven mixing, slow glue and easy to produce particles;


B组分尚未检查和清理。组分B对水蒸气反应灵敏。由于运输和存储环境等偶然因素,组件B的表面可能会结皮。将蒙皮的材料压入管道中可能会产生颗粒。简单的处理方法是使用the头探索结节以进行清理,而不会影响胶水的使用;
Component B has not been inspected and cleaned. Component B is sensitive to water vapor. Due to accidental factors such as transportation and storage environment, the surface of component B may be skinned. Pressing the material of the skin into the pipe may produce particles. The simple treatment method is to use the head to explore the nodules for cleaning without affecting the use of glue;
长期的木材清洁过滤器和单向止回阀。滤网和单向止回阀采用通用的机械密封,长时间使用后容易产生颗粒。建议定期清洁滤网,单向止回阀,静态混合器和胶枪;
Long term wood cleaning filter and check valve. The filter screen and one-way check valve adopt universal mechanical seal, which is easy to produce particles after long-term use. It is recommended to clean the filter screen, one-way check valve, static mixer and glue gun regularly;
B组分压力板上的O形环已经使用了很长时间,已经松动,B组分很可能会留在间隙之间,并且B组分很可能由于水分而形成颗粒,这是因为不容易注意到
The O-ring on the pressure plate of component B has been used for a long time and has become loose. Component B is likely to stay between the gaps, and component B is likely to form particles due to moisture, which is not easy to notice
以上就是今天带给大家的知识,双组份打胶机专注行业多年,为用户不断的提供有价值的内容,更多内容请继续关注我们:http://www.jncsjx.com
The above is the knowledge brought to you today. The two-component gluing machine has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.jncsjx.com

联系我们Contact us

  • 咨询热线:0531-85717458 13705446998
  • 公司地址: 山东省德州市齐河安头乡企巢工业园
  • 扫码联系我们:

截屏,微信识别二维码

微信号:13705446998

//