供胶量和胶水流出的速度由什么决定
时间:2017-08-23 来源:http://www.jncsjx.com/ 发布人:昌盛机械
1.双组份打胶机灵敏的高压保护阀使操作和使用更安全
1. sensitive high pressure protection valve makes operation and use safer
2.气体增压驱动,压力稳定,出胶量均匀
2. gas pressurization drive, the pressure is stable, the yield of glue is even
3.利用流行的静态往复式混合器,混合更均匀
3., the use of internationally popular static reciprocating mixer, mixing more evenly
4.主要原料:硅酮胶,聚硫胶,聚氨脂胶等
4. main raw materials: silicone rubber, polysulfide adhesive, polyurethane glue and so on
5.可调式增压同步联动配比机构,配比调整十分方便
5. adjustable compression synchronous linkage ratio mechanism, matching adjustment is very convenient
6.针状单向阀确保混合体不会回流,避免管内凝固
6. needle check valve ensures that the mixture does not return and prevents the pipe from freezing
7.全封闭固化剂胶路系统,避免固化剂与空气接触而固化
7., all closed curing agent road system, to avoid curing agent and air contact and curing
8、点胶量的大小是由双组份打胶机在点胶过程中持续的时间长短来决定的
8. The amount of dispensing is determined by the duration of the dispensing process in the two-component dispenser
9、双组份打胶机真空回吸阀必须要安装在全自动打胶机上
9, two component rubber machine, vacuum back suction valve must be installed on the full automatic rubber machine
10、在全自动双组份打胶机行业中通常使用的胶水大概有硅胶、瞬间胶、厌氧胶、环氧树脂、UV胶.
10, usually used in automatic two-component glue machine glue in the industry about silicone, instant glue, anaerobic adhesives, epoxy resin, UV glue.
11、双组份打胶机一般在常温下都可以固化,在实际应尽可能采用较高温度来固化
11, two component punch machine can be cured at ordinary temperature, in practice should be as much as possible to use higher temperature to cure
12、双组份打胶机针头的规格与类别:针头的规格会影响点胶机在点胶过程中出胶的大小和精密度
12. Specifications and types of needles for two component punch machines: the size of the needle will affect the sizing and precision of the dispensing machine in the dispensing process
13、双组份打胶机压力的大小直接影响了供胶量和胶水流出的速度.
13. The pressure of the two component sizing machine directly affects the amount of glue supplied and the speed at which the glue flows out
我们用满腔的热情、无限的激情对待工作和客户,双组份打胶机愿意用勤奋的努力和您一起共铸美好明天!
We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!
- 中空玻璃生产线一天能做多少平方 2024/12/23
- 全自动丁基胶涂布机操作规程 2024/12/14
- 丁基胶涂布机在使用的常见问题 2024/12/13
- 双组份打胶机如何调整滴胶量? 2024/12/09
- 中空玻璃生产线的磨损如何解决 2024/12/07
- 双组份打胶机对于打胶工作完成很重要 2024/12/05
- 全自动封胶线的工业自动化设备介绍 2024/12/03
- 玻璃涂布机设备:设备存在的安全隐患 2024/11/25
- 中空玻璃加工设备:玻璃开胶的应急处理措施 2024/11/21
- 中空玻璃生产线:玻璃起雾怎么办?昌盛为您解决! 2024/11/20