中空玻璃生产线在使用中的保养非常简单，主要是保持滑轮各方面的润滑，保持电压的稳定，防止电器的烧毁等等，都是保养中空玻璃生产线应该注意的地方。

The maintenance of the insulated glass production line during use is very simple, mainly to maintain the lubrication of the pulleys in all aspects, maintain the stability of the voltage, prevent the burning of electrical appliances, etc., which are all areas that should be paid attention to when maintaining the insulated glass production line.

为保证机器的良好运行，应加强中空玻璃生产线的日常维护与保养，中空玻璃生产线在运行中若有异常情况应立即停车检查，排除故障后再重新启动。

To ensure the good operation of the machine, it is necessary to strengthen the daily maintenance and upkeep of the insulated glass production line. If there are any abnormal situations during the operation of the insulated glass production line, it should be stopped immediately for inspection, and the fault should be eliminated before restarting.

中空玻璃生产线出现较大的的故障时应有专业人士（康捷机械有专业的售后服务人员）来维修，在开始检修前切忌关掉总电源。

When there is a major malfunction in the insulated glass production line, it should be repaired by professionals (Kangjie Machinery has professional after-sales service personnel), and the main power should not be turned off before starting the maintenance.

1、传动维护：各传送辊轴承、毛刷辊轴承、传送轴承、链轮、齿轮定期加注钙基润滑脂；微型摆线针轮减速机每半年加钙基润滑脂一次；无级调速器每半年换Ub—l或Ub—3型润滑油一次，且在运转过程中应时常检查其油位，保持油位在滑标中心线以上；

1. Transmission maintenance: Regularly add calcium based lubricating grease to the bearings of each conveyor roller, brush roller, conveyor bearing, sprocket, and gear; Add calcium based grease to the micro cycloidal pinwheel reducer every six months; The continuously variable speed controller should change Ub-l or Ub-3 lubricating oil every six months, and the oil level should be checked regularly during operation to maintain it above the centerline of the sliding mark;

2、水路维护：水箱内循环水应每天更换，水箱每周清洗一次，经常检查喷水嘴喷水情况，若发现堵塞应及时清理。

2. Waterway maintenance: The circulating water in the water tank should be replaced daily, the water tank should be cleaned once a week, and the water spray nozzle should be checked regularly. If any blockage is found, it should be cleaned in a timely manner.

3、风路维护：定期检查风机运行情况，如有异常声音应立即停机检查，定期清洗风机过滤栅，减小引风阻力，提高风干后玻璃表面洁净度。

3. Wind path maintenance: Regularly check the operation of the fan. If there is any abnormal sound, immediately stop the machine for inspection. Regularly clean the fan filter grille to reduce the induced draft resistance and improve the cleanliness of the glass surface after air drying.