1.当丁基胶涂布机处于其他位置搬运时，表面需要用柔软的保护垫保护，然后用软绳绑紧，用钩子提起，平稳地移动到其他位置。在运动过程中，请注意周围工人的安全，避免碰撞。同时保护设备不与其他物品碰撞
1. When the butyl rubber coater is transported in other positions, the surface needs to be protected with soft protective pads, then tied with soft ropes, lifted with hooks, and moved steadily to other positions. During the movement, please pay attention to the safety of surrounding workers and avoid collisions. At the same time, protect the equipment from collision with other objects
2.使用包装箱时，使用叉车装载。包装箱应防雨防晒，储存和运输温度应在-10℃至40℃之间。
2. When using the packing box, use the forklift to load. The packing box shall be rain proof and sun proof, and the storage and transportation temperature shall be between - 10 ℃ and 40 ℃.

3.在运输过程中，包装箱允许在容器中堆叠2层。包装箱到达后，检查机器在运输过程中是否损坏，所有零件是否丢失。开箱时应采取所有保护措施防止损坏。机器及其附件。并且确保开箱时零件不会掉落。
3. During transportation, the packing box is allowed to be stacked in two layers in the container. After the packaging box arrives, check whether the machine is damaged during transportation and whether all parts are lost. All protective measures shall be taken to prevent damage when unpacking. Machine and its accessories. And ensure that the parts will not fall when unpacking.
4.丁基胶粘剂涂布机概述我公司生产的丁基橡胶涂胶机采用技术，设计时更大限度地考虑了用户的方便，从而大大提高了生产率和工作效率。丁基橡胶涂层是中空玻璃加工中的一个关键环节。只有当丁基橡胶涂层完好时，才能生产出好的中空玻璃。为了确保间隔框架和玻璃在更好的状态下紧密密封，应保持准确的工作温度。
4. Overview of butyl adhesive coater The butyl rubber coater produced by our company adopts advanced technology, and the user's convenience is taken into consideration in design, thus greatly improving productivity and working efficiency. Butyl rubber coating is a key link in the processing of insulating glass. Only when the butyl rubber coating is intact can a good insulating glass be produced. In order to ensure that the spacer frame and glass are tightly sealed in a better state, accurate operating temperatures should be maintained.
这需要的技术，可以控制行驶速度和涂层一定的厚度。为了满足各种形状中空玻璃的生产要求，有必要生产能够在弯曲的间隔框上涂胶的丁基胶涂布机。
This requires advanced technology to control the driving speed and a certain thickness of the coating. In order to meet the production requirements of various shapes of insulating glass, it is necessary to produce butyl rubber coating machines that can apply glue on curved spacer frames.
以上就是为大家介绍的有关立式丁基胶涂布机详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://linshi.jncsjx.com
The above is a detailed introduction of the vertical butyl rubber coater for you, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://linshi.jncsjx.com