玻璃的清洗是制作中空玻璃的一道工序，也是由中空玻璃生产线的前3段来完成的，这3段分别是上片段，清洗风干段和运输段。玻璃由上片段进入清洗风干段，先由3组毛刷和水进行清洗，然后由大功率热风进行吹干，吹干后玻璃进入运输段。
Glass cleaning is a process of making insulating glass, which is also completed by the first three sections of the insulating glass production line, which are the upper section, cleaning and drying section and transportation section respectively. The glass enters the cleaning and air drying section from the upper section, which is cleaned by three groups of brushes and water, and then dried by high-power hot air. After drying, the glass enters the transportation section.
中空玻璃生产线的毛刷是清洗玻璃的关键部位，对于毛刷的定期维护十分重要。玻璃表面的浮尘、油污和玻璃衬纸的纸胶等很容易黏附在毛刷的刷毛上，有些还会隐藏在毛刷的根部，如果不能及时清理，则会污染被清洗的玻璃表面。尤其是对于清洗离线LOW-E玻璃的清洗机，更要注意毛刷的定期维护。维护时可采用高压水枪进行冲洗。中空玻璃生产线的清洗段，在长期使用后，由于加工的中小型玻璃比较多，其毛刷下部比上部磨损的快，也需要修整。
The brush of insulating glass production line is the key part of cleaning glass, which is very important for the regular maintenance of the brush. The floating dust, oil stain on the glass surface and the paper glue of the glass lining paper are easy to adhere to the bristles of the brush, and some will be hidden at the root of the brush. If it cannot be cleaned in time, it will pollute the cleaned glass surface. Especially for the off-line Low-E glass cleaning machine, pay more attention to the regular maintenance of the brush. High pressure water gun can be used for flushing during maintenance. In the cleaning section of the insulating glass production line, after long-term use, due to the large number of small and medium-sized glass processed, the lower part of the brush wears faster than the upper part, and it also needs to be repaired.

目前一些中空玻璃生产厂家大多采用自来水、井水或普通净水来清洗玻璃，这需要根据实际情况来判断。一般因为自来水、尤其是井水中含有大量的钙、镁、氯等离子，当这些离子附着在玻璃表面时，会影响丁基胶、二次密封胶与玻璃表面的粘结质量，从而影响中空玻璃的密封寿命，容易导致密封失败。普通的净水仅仅是过滤掉了水中的颗粒性杂质，不能去除水中的离子。如果中空玻璃要求比较高，建议加装净水装置，使用去离子水洗清玻璃。
At present, some insulating glass manufacturers mostly use tap water, well water or ordinary purified water to clean the glass, which needs to be judged according to the actual situation. Generally, tap water, especially well water, contains a large amount of calcium, magnesium and chlorine plasma. When these ions adhere to the glass surface, they will affect the bonding quality between butyl glue, secondary sealant and the glass surface, thus affecting the sealing life of insulating glass and easily leading to sealing failure. Ordinary water purification only filters out the particulate impurities in the water and cannot remove the ions in the water. If the requirements for insulating glass are relatively high, it is recommended to install a water purification device and wash the glass with deionized water.
中空玻璃生产线的清洗机水箱中的水要经常更换以保持清洁。在换水时要将水箱中的沉积物清理干净，以防止水箱的供水泵将这些沉积物带到毛刷上。中空玻璃的清洗用水严禁使用洗涤剂。
The water in the water tank of the washing machine of the insulating glass production line should be changed frequently to keep it clean. When changing water, the sediment in the water tank shall be cleaned to prevent the water supply pump of the water tank from bringing these sediment to the brush. It is forbidden to use detergent in the cleaning water of hollow glass.
本文的精彩内容由中空玻璃加工设备提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://linshi.jncsjx.com 我们有专门的客服为您解答问题
The wonderful contents of this article are provided by insulating glass processing equipment. There are many wonderful contents on this website. You can click to enter more contents: http://linshi.jncsjx.com We have special customer service to answer your questions